Anti Aging Thin Gloss Polycarbonate Sheet
PC6811W
Characteristic
- Anti-ultraviolet: one side of the PC board is coated with anti-ultraviolet (UV) coating, and the other side has anti-condensation treatment, which integrates anti-ultraviolet, heat insulation and anti-drip functions. It can block the penetration of ultraviolet rays, and is suitable for protecting valuable artworks and exhibits from ultraviolet rays.
- Light weight: The specific gravity is only half of the glass, saving the cost of transportation, handling, installation and support frame.
- Flame retardant: National standard GB50222-95 confirms that the PC board is Class I flame retardant, namely Class B1. The ignition point of the PC board is 580 degrees Celsius. It will extinguish itself after leaving the fire. It will not produce toxic gases during combustion and will not promote the spread of the fire.
- Flexibility: According to the design drawing, it can be installed in the form of arch, semi-circular roof and window by cold bending
- Energy saving: keep cool in summer and keep warm in winter, PC board has lower thermal conductivity (K value) than ordinary glass and other plastics, heat insulation effect is 7%-25% higher than equivalent glass, the insulation of PC board The heat is up to 49%. Therefore, the heat loss is greatly reduced, and it is an environmentally friendly material for buildings with heating equipment.
- Temperature adaptability: PC board does not cold and brittle at -100 ℃, does not soften at 135 ℃, its mechanical and mechanical properties in the harsh environment have no significant changes.
Description
PC sheet is also called polycarbonate sheet, Kapron sheet. Weak acid resistance, which is made of polycarbonate as the main component and adopts co-extrusion technology CO-EXTRUSION, shows that the PC sheet is resistant to neutral oil, strong acid, durable, and alkali-resistant. It needs to be coated with UV. But the high temperature resistance and good lighting effect PC sunshine board (also known as polycarbonate hollow sheet, glass capron sheet, PC hollow sheet) is processed with high-performance engineering plastic ---- polycarbonate (PC) resin It has the characteristics of high transparency, light weight, impact resistance, sound insulation, heat insulation, flame retardance, and aging resistance. It is a high-tech, extremely comprehensive performance, energy-saving and environmentally friendly plastic sheet, and is a widely used plastic building in the world Materials, there are advantages that other building decoration materials (such as glass, plexiglass, etc.) can not match.
Typical Property Values
| Property | Testing Method | Testing Condition | Units | Value |
| Physical | ||||
| Specific Gravity | ISO 1183 | —— | G/cm3 | 1.2 |
| Light Transmission | ASTM D1003 | —— | % | >89 |
| Water Absorption Equilibrium | ASTM D570 | 24 Hours | % | 0.35 |
| Mechanical | ||||
| Tensile Strength | ISO527 | —— | Mpa | 60 |
| Tensile Modulus | ISO527 | Mpa | 2400 | |
| Flexural Modulus | ISO178 | Mpa | 92 | |
| Temperature Resistance | ||||
| Vicat Softening Temperature | ISO306 | ℃ | 148 | |
| Thermal expansivity | ISO11359 | /℃ | 6.5*10-5 | |
| Electrical | ||||
| Permittivity | IEC60250 | —— | 3.1 | |
| Voltage test | IEC60243 | KV/mm | 30 | |
| Volume Resistivity | ICE60093 | 25℃,50%RH | Ω.cm | 1016 |
| Surface Resistivity | ICE60093 | 25℃,50%RH | Ω | 1017 |
| Gaute Variation | >0.5mm ±3% | |||
| 0.25—0.5mm ±5% | ||||
| 0.1—0.25mm ±10% | ||||
| ≤0.1mm ±0.008mm | ||||
Note: The above figures are typical values obtained under standard methods and should not be construed as unsteady application conditions.
Application
Wide used in such as:the hat,sunglass,windows,aviation sheet,lighting,electroplating,vacuum forming,dyeing,etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.