PC6811

PC6811

Characteristic

(1) Impact resistance: The impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic plates of the same thickness, and 2-20 times that of tempered glass. There is no crack when falling with a two-meter hammer below 3kg. "Glass" and "Xianggang".
(2) Anti-ultraviolet: one side of the PC board is coated with anti-ultraviolet (UV) coating, and the other side has anti-condensation treatment, which integrates anti-ultraviolet, heat insulation and anti-drip functions. It can block the penetration of ultraviolet rays, and is suitable for protecting valuable artworks and exhibits from ultraviolet rays.
(3) Light weight: The specific gravity is only half of the glass, saving the cost of transportation, handling, installation and support frame.
(4) Sound insulation: The sound insulation effect of PC board is obvious, which has better acoustic insulation than glass and acrylic board of the same thickness. Under the same thickness, the sound insulation of PC board is increased by 3-4DB compared to glass. It is the material of choice for highway noise barriers internationally.
(5) Energy saving: keep cool in summer and keep warm in winter, PC board has lower thermal conductivity (K value) than ordinary glass and other plastics, heat insulation effect is 7%-25% higher than equivalent glass, the insulation of PC board The heat is up to 49%. Therefore, the heat loss is greatly reduced, and it is an environmentally friendly material for buildings with heating equipment.

Description

PC board is also called polycarbonate board, Kapron board. Weak acid resistance, which is made of polycarbonate as the main component and adopts co-extrusion technology CO-EXTRUSION, shows that the PC board is resistant to neutral oil, strong acid, durable, and alkali-resistant. It needs to be coated with UV. But the high temperature resistance and good lighting effect PC sunshine board (also known as polycarbonate hollow board, glass capron board, PC hollow board) is processed with high-performance engineering plastic ---- polycarbonate (PC) resin It has the characteristics of high transparency, light weight, impact resistance, sound insulation, heat insulation, flame retardance, and aging resistance. It is a high-tech, extremely comprehensive performance, energy-saving and environmentally friendly plastic sheet, and is a widely used plastic building in the world Materials, there are advantages that other building decoration materials (such as glass, plexiglass, etc.) can not match.

Application

Wide used in such as:the hat,sunglass,windows,aviation sheet,lighting,electroplating,vacuum forming,dyeing,etc.