Inconel 713C Nickel Alloy Plate
Inconel 713C Round Bar
We Manufacture and Sell Inconel 713C Round Bar by Investment Casting,Bar Diameter form 6.0mm-300mm.More Detail information,Please contact us!
Inconel 713C is a nickel-chromium alloy that is ideally suited for jet engine gas turbine blades.Inconel 713C offers outstanding resistance to thermal fatigue and good castability while offering exceptional rupture strength at 1700°F (927°C).
Inconel 713C Round Bar Chemical Compositons:
| Alloy | % | Ni | Cr | Fe | Mn | Si | Mo | Zr | Ti | Cu | Co | Al | C | S |
| 713C | Min. | Bal | 12.0 | - | - | - | 3.8 | 0.05 | 0.5 | - | 1.8 | 5.5 | - | - |
| Max. | 14.0 | 2.5 | 0.25 | 0.5 | 5.2 | 0.15 | 1.0 | 0.5 | 2.8 | 6.5 | 0.20 | 0.015 |
Inconl 713C Round Bar Physical properties
| Density | 7.913 g/cm³ |
| Melting point | 1260℃-1288℃ |
Inconel 713C Products Mechinabity Physical
●High-speed tungsten-cobalt or molybdenum-tungsten-vanadium toolsCutting lubricants:
Chlorinated, sulfurized fatty mineral oil
Rich emulsion of 10 parts water and 1 part soluble oil
Aluminum oxide
Vitrified bond of medium or soft hardness and medium open structure
Use 1 pound of sal soda with 25 gallons of water, or chemically active grinding coolant
Inconel 713C Weledablity
- Inconel 713C can be used in applications using very low restraint
- Use Inco-Weld A electrode
- Flash-butt weld
- Inconel 713C is also good for hydrogen-atmosphere brazing with normal high-heat brazing alloy with electroplated mating surfaces
Inconel 713C Applications
Inconel 713C is most commonly used for jet engine gas turbine blades.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.