60Hz 127V 3 Phase Biogas Generator Set , Biomass Gas Generator Silent / Open Design
60Hz 127V 3 Phase Biogas Generator Set 180KVA 150KW With CE Silent / Open Design Biogas Power Plant
Biogas Requirements
Acceptable fuel gas pressure: 3~7kPa, CH4 content ≥55%
Gas low heat value (LHV) ≥25MJ/Nm3. If LHV<25MJ/Nm3, gas engine power output will be decreased.
Gas doesn't include any free condensation water or free materials (the size of impurities should be less than 5μm.)
H2S content≤ 100ppm. NH3 content≤ 50ppm. Silicon content ≤ 5 mg/Nm3
Impurities content≤30mg/Nm3, size≤5μm
No free water.
CHP Main Specifications
| Item | Model | SP165B | |
| fuel | — | Biogas | |
| marks | — | Synchro Genset | |
| CHP | electrical output(KWe) | kVA/kWe | Continuous Power |
| 187.5/150 | |||
| frequency | Hz | 60 | |
| voltage | V | 110/220 | |
| gas inlet pressure | kPa | 3-5 | |
| dimension (soundproof type) | mm*mm*mm | 2900*1600*1800 | |
| net weight | kg | 3500 | |
| Biogas consumption | m3/kW.h | 0.42 | |
| Biogas consumption for one hours | m3/h | 63 | |
| db(A)@7m | — | 59 | |
| Certificate | — | CE | |
| ignition system | — | Impco | |
| speed governor | — | Woodward | |
| gas filter | — | Madas | |
| zero regulator | — | Kromschroeder | |
| MCB | — | ABB | |
| GCB | — | ABB | |
| Controller | ComAp IC | ||
| Engine | Engine model | — | STYER T10 |
| Engine type | — | 6 cylinders,4stroke,water-coolled | |
| RPM | — | 1800 | |
| Compression Ratio | — | 11.0 | |
| Displacement | — | 9.726L | |
| Oil capacity | — | 24L | |
| Charging voltage | — | 24V(DC) | |
| Charging current | — | 5A(DC) | |
| Starting system | — | Electic-start | |
| Alternator | model | — | Meccalte |
| phase | — | 3 phase 4 wires | |
| insulation system | — | class H | |
| protection | — | IP23 | |
| Cooling Type | — | air cooled |
Characters
Environmentally friendly design.
Long time R&D and testing ensure high reliability.
Maximum lower the noise level.
Maintenance friendly thanks to easy access.
For more information about the genset, please consult with your sales representative.Thanks.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.