8l/H Fillable Enclosure Cartridge Pre Filter Uf 304 Steel Purifier
Price:
1-99Pieces 60$/Piece >=100Pieces 55$/Piece
MOQ:
1 pcs
Delivery Time:
3-7 days
Brand:
jineng
Product Description
Stainless Steel Filter Housing Water Filter Housing Refillable Cartridge Uf 304 Steel Purifier
When filtering, water passes through the lamination from the outside, and the filter laminations are tightly pressed together under the action of the hydraulic force of the spring, the impurity particles are trapped at the intersection of the laminations, and the filtered water flows out of the filter.
In the backwashing state, when a certain pressure difference or time is reached, the system flushes the controller to control the valve to change the direction of the water flow, so that the impurities on the laminate are flushed out.
Product parameters
| length(inches) | interface(mm) | Filtration precision(μm) |
| 5 | 10,20,33.3 | 40-60 |
| 10 | 10,20,33.3 | 40-60 |
| 20 | 10,20,33.3 | 40-60 |
| 30 | 10,20,33.3 | 40-60 |
| Material: | High Quality Stainless Steel 304 or 316L |
| Design Pressure: | 150 PSI (10 Bar) |
| Work Temperature: | 110 Degree |
| Cartridge Quantity | 1, 3, 5, 7, 9, 11, 12, 13, 15, 20, 30… … 120 Round |
| Cartridge Length | 5" , 10" , 20" , 30" , 40" |
| Cartridge Adaptor | DOE, 222, 226 |
| Inlet/Outlet: | Tri-Clamp,Flange,Threaded |
| Gasket Material | SILICONE, EPDM, PTFE, VITON Etc |
| Surface Finish: | Mirror Polish, Electrical Polish, Acid Washing, Sand Blast Etc |
| Configuration: | CIP Spray Ball, Manhole, Liquid Level, Sampling Socket |
| Temperature Gauge, Pressure Gauge, Adjusting Leg, Ladder etc. | |
| Applications: | Food & Beverage, Wine Industry, Pharmaceutic, Chemical Industry etc |
Application field
Is a specific thin plastic laminated on both sides of a large number of micron size grooves, a string of the same mode laminated stiffiiess in the special design of the inner support through the spring and liquid pressure, the groove between the laminated cross, so as to form a series of about 100 micron filter unit.
Siphon type front filter USES the outer pressure type, through the pressure of tap water from seeping through the outer wall of the pipeline inside, particle impurities such as silt, rust, red worm is film hole intercept to the surface, form negative pressure switch on flushing water flow around the filter element, the built-in water distribution device can effectively remove the dirt from the screen intercept material,Impurities trapped on the surface of the film are washed away by water through the inner tube of the device, which is much better than the previous two front-facing devices in washing effect.Disadvantages: complex product structure, washing is not complete, such as poor water quality some impurities embedded in the filter element deeper, tighter final filter blocked, resulting in secondary pollution, once blocked up maintenance is very difficult, most of the production of siphon type products filtering accuracy are above 50 microns.
Factory introduction
Packaging logistics
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Anping County Jineng Metal Wire Mesh Co., Ltd.
Location
Anping County Economic Development Zone, Road No. 5
Contact Person
junai