Cement Industry Belt Type Bucket Elevator For Conveying Particles Material
Bucket Elevator of Cement Industryis / TD Series Belt Type Bucket Elevator
Bucket Elevator Introduction:
Belt type bucket elevator use belt as dragging device, it mainly use for conveying material with bulk densityρ＜1.5t/m³in vertical direction, which can be powdery material, particles, small lump, less abrasive material. Use normal belt, the temperature of conveying material should not exceed 60℃, Use wire belt, conveying material temperature can reach 80℃,use heat resistant belt, material temperature not exceed 150℃, elevating height is 4～30m.Normal model of TD type bucket elevator is TD160,TD250,TD315,TD400 etc. conveying capacity is 3.1～66m³/h. It is widely use in chemical engineering, metallurgy, construction material, food, mining industries etc.
Bucket Elevator Application:
Bucket elevator is designed for vertical transportation powder, granular materials and small block and grinding of small materials, such as: coal, cement, stones, sand, clay, ore and so on. Or other industries of dry mortar for construction, chemistry and foodstuff.
Our Advantages:
1. Widely usage, it can elevate powdery material, particles, small lump material.
2. Flexible to select mixing or centrifugal discharge method according to material properties.
3. Good sealing, no dust escape. Clean and environmental protection.
4. Using rubber belt with small dead load, flexible, stable operation, thus elevating speed and process efficiency is higher.
Technical Data:
| Model |
Bucket Type |
Capacity (m³/h) |
Bucket Width (mm) |
Bucket Pitch (mm) |
Belt Width (m/s) |
Bucket Running Speed (m/s) |
Max Size of Material (mm) |
Elevating Height (m) |
|
| TD160 | Q | S | 5～12 | 160 | 400 | 200 | 1.4 | 25 | ≤20 |
| TD250 | Q | S | 20～35 | 250 | 400 | 300 | 1.6 | 35 | ≤30 |
| TD315 | Q | S | 25～40 | 315 | 500 | 400 | 1.6 | 45 | ≤30 |
| TD400 | Q | S | 35～66 | 400 | 500 | 450 | 1.6 | 55 | ≤30 |
Our service:
Training & Service
Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment,
according to your special demand.
Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators
and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
Welcome to visit our company and workshop, we sincerely look forward to cooperating with you. We will provide you with the most suitable products with the reasonable price.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.