5 Ton Schneider Electric Single Girder Overhead Travelling Crane For Workshop
5 Ton LDA Type Electric Single beam overhead travelling crane for workshop
| Capacity | t | 3 | 5 | 10 | 16 | 20 | ||
| Span | 7.5~31.5m | |||||||
| Speed | Hoisting | m/min | 8. 8/0.8 | 7. 7/0.7 | 3.5, 3.5/0.35 | 6. 6/0.6 | ||
| Travelling of crab | 20 | |||||||
| Travelling of crane | Surface | 20(30) | 20 | |||||
| Cabin | 20(30) | 20 | ||||||
| Electric hoist | Type |
CD1-3 MD1-3 |
CD1-5 MD1-5 |
CD1-10 MD1-10 |
CD1-16 MD1-16 |
HC20T | ||
| Lifting height | m | 6,9,12 | 6,9,12,18 | 9,12 | 9,12 | 9,12 | ||
| Working class | A3~A5 | |||||||
| Power supply | 3-phrase 50HZ 380V | |||||||
Electric single girder overhead crane product description
Electric single girder overhead crane is a light lifting device running on rails, mainly composed of gantry main girder, end girder, crane structure (electric hoist), operating mechanism and electric control system.
It adopts electric wire rope hoist as the hoisting mechanism, and runs along the lower track of the I-beam main beam during operation.
LDA single girder overhead cranes are designed and manufactured to ISO, DIN and FEM standards. Compact structure, light weight, soft start and stable operation. For workshops, warehouses, material stacking of goods or goods, or mechanical assembly.
Photos of 5Ton LDA Single Girder Overhead Crane with Electric Hoist
Sketch of 5Ton Single Girder Overhead crane with Electric Hoist for sales
| Configuration details of the EOT Crane: | ||
| Steel plate | Anyang/ Handan Q235 steel | |
| Hoist lifting motor | Large starting torque conical rotor Squirrel cage motor with disc brake | |
| Trolley traveling motor | Soft starting Squirrel cage with disc brake | |
| Crane traveling motor | Soft starting Squirrel cage with disc brake | |
| Hoist lifting reducer | 3-level helical gear type, gear and axles are of alloy steel or quailty carbon steel,reducer cover is of cast-iron | |
| Trolley traveling reducer | Involute gear reducer LD type | |
| Crane traveling reducer | Involute gear reducer LD type | |
| Wheel |
50# steel forged wheel, Annealing to stress relief, mid-frequency quenching for tread and flange surface,low tempering After heat treated,Tread and flange surface hardness reach HB300~380 |
|
| Bearing | Luoyang | |
| Brake | Built in brake | |
| Wire rope | High strength wire rope 6x37+FC1770 | |
| Hook | Forged 20Mn high strength material forged hook | |
| Main Electrical parts | SCHNEIDER | |
| Trolley power supply | Festoon cable | |
| Control mode | Pendent line control | |
| Control panel | YES | |
| Cable |
Crane industry special cable YC or YVFB type, bear temperature up to 60’C |
|
| Buffer | High quality polyurethane buffer | |
| Painting |
Manual brush painting,One alkyd iron red primer painting, two alkyd orange enamel finish painting |
|
| Safe features of the EOT Crane: | ||
| Weight overload protection device | √ | |
| Emergency stop system | √ | |
| Over current Protection,Short-circuit Protection | √ | |
| Phase sequence protection, Zero position protection,No-Voltage protection | √ | |
| Mechanical interlock protection of controller | √ | |
| Limit switch for crane long traveling | √ | |
| Stopper and Limit switch for trolley cross traveling | √ | |
| Lifting up and lower down limit switch | √ | |
| High quality polyurethane buffer for crane long traveling protection | √ | |
1). Overload limiter
2). Overcurrent protection,Short circuit protection.
3). Lifting limit switch,cross and long traveling limit switch
4). Gravity limit switch
5). Phase squence protection,Zero position protection.
6). Emergency stop button
7). Voltage loss protection.
company information:
Henan Mining Crane Co., Ltd. is the largest industrial crane manufacturer in China since 2002. The main products are electric hoist / bridge crane / gantry crane / grab crane / magnetic crane / ladle crane / explosion-proof crane / container gantry crane / European crane and hoist / electric winch, jib crane, scissor lift / crane components.
The company has 4,500 employees, a plant area of 1.42 million square meters, 3,500 sets of various advanced equipment, and an annual sales volume of 100,000 hoists. It has passed ISO, CE and other certifications, and the cranes are exported to 120 countries.
Certification:
We have passed CE, GOST, SGS and OHSAS & ISO9001:2000 international quality control, ISO14001:1996 environment and ISO9001:2001 health and safety certification.
We have a complete quality control system, strict management system, strong production capacity and advanced testing methods, which ensure high production capacity and high quality cranes.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.