850*750*400mm 2 Test Stations Helium Leak Testing Machine
Helium Leak Testing Equipment For Plate Heat Exchanger With 2 Test Stations
Test principle:
According to the basic leak detection principle of helium leak detection, helium is used as the tracer gas. In the internal leak detection cycle, helium is filled into the B cavity of the workpiece to detect the internal leak between A and B; in the external leak detection cycle, A and B are filled with helium at the same time to detect the leakage of the cavity; the helium leak detector can accurately determine the leakage of the plate heat exchanger with high accuracy, quickly and accurately.
The workpiece first detects the internal leakage at the internal leakage detection station, and then pushes the product to the external leakage detection station through the conveyor line to detect the external leakage.
For a three-cavity workpiece, in the internal leakage detection cycle, cavity A is filled with helium to detect the leakage between AB and AC; in the external leakage detection cycle, A, B, and C are simultaneously filled with helium to detect the external leakage of the cavity . Leak Testing Equipment
Parameters: (can be customized according to client's requirements)
| Workpiece | Plate Heat-Exchanger. Leak Testing Equipment |
| Leak testing station | Two Stations: one is for workpiece strength and inner leak test ,the other is for outer leak test |
| Size of testing chamber |
850*750*400mm Can be installed a large workpiece (620*500*250mm) or 2 small workpieces( 320*100*77mm) |
| Gas for Gross Leak Test | Nitrogen |
| Nitrogen leakage pressure | 5.5MPa |
| Gas for fine leak test | 100% Helium |
| Helium leakage pressure | 5.0MPa |
| Reject point | 5.0E-7Pa.m3/sec. |
| Cycle time | It takes 8 hours to check 480 small workpieces or 240 large workpieces |
| Helium recovery rate | ≥98% |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.