Automotive torsion spring tester Mechanical Strength Test Stroke 500mm

Function:

It is mainly used for testing raw materials, semi-finished parts and finished parts; Computer control operation is adopted to collect torque, peak value, angle, curve and other data; The display displays the torque time, torque angle time and torque torque angle test curves of the tested parts; It can realize the storage, examination and printing of test data, test report, etc. Mechanical Strength Test

Main technical parameters:

Parameter1):

1.Style: horizontal

2.Tester level: level 1

3.Accurate measurement range: 1%FS-100%FS;

4.Torque value error: better than 1%;Torque repeatability error is better than 1%

5.Angular resolution ratio: 0.01

6.Angle measurement accuracy: better than 1%

7.Torsion accessories: three jaw chuck, two-way jacking type

8.Test stroke: 300mm or 500mm (can be increased)

9.Torsion speed control range: 0.01r /min ~ 5R/min stepless speed regulation

10.Torsion speed control accuracy: better than 1%

11.Testing machine level: level 1

12.Appearance: GB/T2611 requirements

13.Protection function: the testing machine has overload protection function

14.Power supply:220V,50HZ

Parameter2):