IEC68 Auto Parts Test Equipment Rapid Temperature Change Test Chamber 20%〜98%RH

Price Negotiable

Price: Negotiatable

MOQ: 1 Set

Delivery Time: 40 days

Brand: HeJin

Product Description

Rapid Temperature Change Test Chamber 20%〜98%RH Auto Parts Test Equipment IEC68

Products Introduction:

It is suitable to conduct high and low temperature ,wet and heat tests for electricians, electronics, machinery and other products, parts, materials, and to conduct quality and reliability tests for products, parts and materials under simulated temperature and humidity changes.Auto Parts Test Equipment

Meet the standards:

GJBl50.9-2009 (MIL-STD-810D) Hot and heat test method;

GJB360.8-2009(MIL-STD.202F) High-temperature life test;

GJBl50.3-2009 (M-I L-STD-810D);High temperature test method

GJBl50.4-2009 (MIL-STD-8 I 0 D);Low temperature test method

GB-2423.1-2008 (IEC68-2-1) Test A: Low temperature test method;

GB-2423.2-2008 (IEC68-2-2) Test B: High temperature test method;

GB2423.3-2008 (IEC68-2-3) Test Ca: Constant heat and humidity test method;

GB2423.4-2008 (IEC68-2-30) Test Db:Alternating humid heat test method Auto Parts Test Equipment

Parameters:

Model		AM0034-KW408	AM0034-KW960	AM0034-KW1000
Inner box size mm (W * H * D)		800×850×600	1800×1000×800	1000×1000×1000
Outer box size mm (W * H * D)		1060×1880×2300	2200×2050×3350	1700×2200×3000
Temperature range		A:-40～+150℃; B:-50～+150℃; C:-65～+150℃
Linear speed		3℃/min ；5℃/min ；10℃/min ；15℃/min；20℃/min
Temperature departure		±2.0℃
Temperature fluctuation		±0.5℃
Temperature uniformity		±2.0℃
Temperature raising rate		Heating rate: rise from-55℃ to + 130℃ when the linear 15℃ / min empty load Cooling: drop from + 130℃ to-55℃ linear 15℃ / min empty load
Humidity range		20%〜98%RH
Humidity deviation		±3.0％RH(＞75％RH),±5.0％RH(≤75％RH)
Humidity uniformity		± 3.0%RH (no-load) Auto Parts Test Equipment
Humidity fluctuation		±2.0％RH
Heater		High quality nickel-chrome combined with gold wire electric heater, contact-free control mode (SSR).
Humidifier		Apply the external wet mode Water level control device, heater anti-dry heating device.
Heater control mode		No contact control mode (SSR), water level control device, heater anti-drying burning device.
Cooling system	compression engine	A German Bock semi-hermetic compressor or a German Bizer semi-hermetic compressor
	cooling medium	Non-fluorine environmental protection refrigerant R404A R23, in accordance with environmental protection regulations, safe and non-toxic.
	condensator	Shell-tube-type condenser (water-cooled type). Auto Parts Test Equipment
	Evaporator	High performance fin type automatic load capacity adjustment, long-term use of low temperature and high humidity conditions without frosting.
Control System	sensor	High-precision grade A PT100Ω
	controller	Weinview programmable temperature and humidity controller (7-inch 16-bit real color touch screen)
	Control resolution	Temperature: + 0.01℃; humidity: + 0.1%; time: 0.01min. Auto Parts Test Equipment
Internal wall material		SUS304 # fog surface stainless steel plate
External wall material		High quality carbon steel plate, the surface for electrostatic color spray plastic treatment
heat insulating material		Hardcore polyurethane foam insulation layer + fiberglass
Safety protection device		Heater air burning to prevent the protection switch, heater over current circuit breaker, circulating fan overcurrent overload protection
		Compressor high-voltage protection switch, compressor overheat protection switch, compressor overcurrent protection switch
		Underphase protection switch, circuit breaker, no-fuse switch, zero crossing brake fluid power controller
Alarm instructions		When the above protection occurs, the equipment stops running and emits a sound and light alarm while displaying the fault position on the instrument.
Use the installation conditions		Surrounding environment: Operation guaranteed ambient temperature range: 20~28℃, relative humidity: 85%RH,380V ± 10%V; 50Hz; three-phase four-wire + grounding wire, protective grounding resistance is less than 4 Ω.