4CH Dual Side Single Fiber CWDM OADM Add Drop Mux Demux
Fibre Optical CWDM OADM Add/Drop Mux Demux Module 4CH Dual-side Single Fiber
GEZHI's Fibre Optical CWDM OADM Add/Drop Mux Demux Module 4CH Dual-side Single Fiber transmission with CWDM wavelength1510, 1530, 1550, 1570nm. The Fibre Optical CWDM OADM Add/Drop Mux Demux Module 4CH Dual-side Single Fiber combines wavelength channels onto an optical transmission fiber. Gezhi's Fibre Optical CWDM OADM Add/Drop Mux Demux Module 4CH Dual-side Single Fiber are used in WDM systems for multiplexing or demultiplexing and routing fiber optic signals, selectively adding and dropping individual or sets of wavelength channels from a CWDM stream. This 4CH Optical CWDM OADM add/drop mux demux are available in dual-sided (East and West) configurations supporting up to Four wavelengths on one fiber.
|
Features One Fiber working Low Insertion Loss Flexible OADM networking Dual-sided East and West No electric power required
|
Applications Optical Add and Drop Acess Network Telecommunication WDM Network Long Haul Networks
|
Specification
|
Parameter |
Unit |
4CH CWDM OADM | ||
| Add | Drop | |||
| Channel Wavelength | nm | 1510, 1530, 1550, 1570nm | ||
|
Center wavelength Accuracy |
nm | ±0.5 | ||
| Channel Spacing | nm | 20 | ||
|
Channel Passband (@-0.5dB bandwidth |
nm | >15 | ||
| Insertion Loss | dB | <1.8 | <1.8 | |
| Channel Ripple | dB | 0.3 | ||
|
Isolation |
Adjacent | dB | >30 | |
| Non-adjacent | dB | >40 | ||
|
Inertion Loss Temperature Sensitivity |
dB/℃ |
<0.005 |
||
|
Wavelength Temperature Shifting |
nm/ ℃ |
<0.002 | ||
|
Polarization Dependent Loss |
dB | <0.1 | ||
|
Polarization Mode Dispersion |
dB | <0.1 | ||
| Directivity | dB | >50 | ||
| Return Loss | dB | >45 | ||
| Maximum Power Handling | mW | 300 | ||
| Opterating Temperature | ℃ | -20~+70 | ||
| Storage Temperature | ℃ | -40~85 | ||
| Package dimension | mm | L100x80x10 | ||
Note: 1. Customization is available.
2. Specified with connector
Drawing
Fibre Optical CWDM OADM Add/Drop Mux Demux Module 4CH Dual-side Single Fiber
It drops the individual channel and adds that same channel back onto the network fiber in dual-sided transmission.
4 channel 1510,1530,1550,1570nm CWDM add & drop multiplexer for EAST and WEST for bi-directional data transmission over single fibers.
Fibre Optical CWDM OADM Add/Drop Mux Demux Module 4CH Dual-side Single Fiber filter cascading
Fibre Optical CWDM OADM Add/Drop Mux Demux Module 4CH Dual-side Single Fiber
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.