Fiber Optical Switches

Single 1x2 Non-latching Fiber Optical Switches 1310/1550nm Fiber Optical Switch The single 1x2 optical switch is a standard 1x2 configuration with 3 fibers and 2 states. GEZHI fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using mechanical configurations and activated via an electrical control signal. Features PCB Mountable Low Insertion Loss Smallest Size Fast Switching Speed Available in

1x1 Fiber Optical Switches On/Off Shutter latched Fiberoptic switch GEZHI's 1x1 Fiber Optical Switches is designed for use in optical fiber communication networks and measurement instruments. The 1x1 On/off shutter latched switch consists of two ports that selectively transmits, redirects, or blocks optical power in a fiber optic transmission line. The 1x1 On/Off shutter latched fiberoptic switch must be actuated to select or change between two states. As a result, it

Dual 2x2B Fiber Optical Switches mini 4x4 fiberoptic bypass switch GEZHI's Dual 2x2B is designed for use in measurement instruments and optical fiber communication networks. Its comes with 4 input and 4 output. This mini 4x4 fiberoptic bypass switch is achieved using a opto-mechanical configuration and activated via an electrical control signal. This advanced design of GEZHI Dual 2x2B fiber optical switches offering unprecedented high stability as well as an unmatched low

1x32 SM Optical Fiber Switch Module TTL interface 1310/1550nm FC/PC​ GEZHI 1x32 SM Optical Fiber Switch is a kind of light path control equipment. It can realize multi-channel fiber optic light path switching. The 1x32 Optical fiber switch is modularized design with drive circuit breakdown self-checking function. It is used for multi light source/detector selection, multi-channel fiber monitoring, and optical fiber path protection etc in the optical fiber transmission system.

1x8 Optical Switch FSW-1x8-SM 1260~1650nm with RS232 interface GEZHI 1×8 optical switch is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations Features Wide Wavelength

780nm Polarization Maintaining 1x2 PM Fiber Optical Switches GEZHI Photonics Co.,Ltd’s PM Optical Switches series of polarization maintaining Fiber Optic switches are 1X1 port and 1×2 ports micro optic devices built with PM Panda fiber. These devices can switch the optical input to one of two outputs while maintaining the polarization of the signal.The PM Optical Switches series enables bi-directional operation. And widely used in the field of optical cross, PON networks and

Visible light 760nm 1x4 fiberoptic switch The 1x4 Fiberoptic switch of GEZHI Photonics Co.,Ltd , which with visible light of wavelength = 760 nm. The 1x4 fiberoptic switch is bi-directional connects optical channel by directing or blocking an incoming optical signal into the output fiber. They feature high level of performance required for multi-unit testing in R&D and in manufacturing environments. They are also highly suitable for applications in telecommunications, R&D in

1x32 Stepper Motor Optical Switches Bi-directional Opto-mechanical Switch GEZHI's 1x32 opto-mechanical switches utilize a high resolution stepper motor to reliably and repeatably connect fibers to one another. In addition, the 1x32 Stepper Motor Optical switches are bi-directional and can be used in either the 1xN or Nx1 direction. It can realize multi-channel fiber optic light path switching. The 1x32 Stepper Motor Optical Switches Bi-directional Opto-mechanical Switch is

Dual 1x2 Optical Switch 2x4 Fiber optic switches 1310&1550nm 1meter FC/APC GEZHI Dual 1x2 / 2x4 Fiber Optic switches configurate by Six fibers and two states. It connect with FC/APC connector and with Non-latched 3V voltage, PCB moutable. GEZHI Dual 1x2 / 2x4 Fiber Optic Switches connects optical channels by redirecting an incoming optical signal into a selected output fiber. The 2x2 Optical Switch is apllication in R&D in laboratory, Metropolitan Area Network and Configurabl

1x2 Fiber-optic Prism Optical Switches Single-mode 1550nm without connector GEZHI 1x2 Fiber-optic Prism Optical switches configurate by 1x2 type with Three fibers and two states. It connect without any connector for customized and with Non-latched 3V voltage, PCB moutable. GEZHI 1x2 Fiber-optic Prism Optical Switches connects optical channels by redirecting an incoming optical signal into a selected output fiber. The Fiber-optic Switches is apllication in Optical network

Mini 1x8 Mechanical Fiber Optical Switches Non-latched optic switch GEZHI ’ Mini 1×8 Mechanical Fiber Optic Switch (1×8 Optical Switch) support all wavelength at 1260nm~1650nm or 850nm Multimode wavelength, Its mini type with size 35x35x9mm. it offers low insertion loss,ultra-high reliability, fast switching speed as well as bi-directional performance. The optical switches are widely used for Protection, Optical Network, Transmitter and Receiver Protection,Network Test System

SM 1310/1550nm Non-latching 2x2 Fiber Optic Bypass Switch Module GEZHI 2x2 Fiber Optic bypass switch module packing in a Metal case with high operating temperature. Its comes with 1310&1550nm singlemode Non-Latching type SC/APC pigtailed. 2x2 Bypass Fiberoptic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical

1x2A Multi Mode 850nm Optical Switch Non-Latching 5V with mini Metal case GEZHI 1x2A Multi Mode 850nm Optical Switch packing in a mini metal case and control with 4pins. The item is Non-Latching Voltage 5V with LC/PC connector. Customized specification is available. Features Low Insertion Loss Fast Switching Speed Smallest Size High operating temperature Applications OADM MAN System Monitoring Component Testing Specification Parameters GZ-FSW-1×2A Wavelength Range nm 850±40 /

2x2 Single Mode Fiber Optical Bypass Switches for Optical Network Protection GEZHI 2x2 optical bypass switches for 100M/1G/10G fiber optic networks protect the network from failures and ensure network integrity during power loss. Each of these GEZHI fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local

1x4 mini Optical Switches Gezhi fiber-optic switches are designed based on refraction optical principle which reduces moving part position sensitivity. It featuresexcellent mechanical and optical performance and unify different switch configuration of Mini 1x4 and Mini 1x8 onto the same compact package. The products are Telcordia GR-1073-CORE qualified, and RoHS complaint. Features Fail-Safe Latching Unmatched Low Cost Low Optical Distortions Epoxy-Free Optical Path High

1x32 Optical Switches Gezhi company supply 1xN Optical Switch, as a professional optical device manufacturer in Shenzhen,China, high quality and low price 1xN Optical Switch. Gezhi-1xNoptical switches, which is famous for its high performance, low insertion loss and compact dimension. It is an ideal Component for OADM system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. Features Fail-Safe

1x16 Optical Switches 1xN Optical switches it is used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fiberoptic switches are true switching solutions for optical networking applications. Features Fail-Safe Latching Unmatched Low Cost Low Optical Distortions

1x8 Optical Switches The 1x8 mechanical optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. Features Fail-Safe Latching Unmatched Low Cost Low Optical Distortions Epoxy-Free Optical Path High Reliability Applications Channel Blocking Configurable Add/Drop System Monitoring Instrumentation

1x4 Optical Switches Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. Features Fail-Safe Latching

1x4 Optical Switches The Gezhi' s 1x4 fiber optic switch connects optical channels by redirecting an in- coming optical signal into a selected output fiber. This is achieved by using a patent pending opto-mechanical configuration activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The switch has integrated electrical position sensors, and the new material based advanced design significantl