Temperature Resistance FVMQ Rubber Sealing Molding Part
-60℃ to 220 ℃ wide range temperature resistance FVMQ O ring
Description:
Fluorosilicone rubber: it is uniform mixture by fluorosilicone elastomer as base gum and with various fillers and additives.
It has the advantages of silicon rubber and fluorine rubber; has a wide range of use temperature: -60~220℃; it has solvent and oil resistance, what is similar with fluorine rubber; it retains the advantages of high tensile holding rate of silicone rubber at high temperature; it has good insulation performance; low permeability meets the requirements of environmental protection.Therefore, it is applicable to the sealed environment of resist high and low temperature, oil and medium. It is widely used in aviation, automobile, petroleum and medical, etc, fields.
Standard:
AS568: American Standard
BS-1516, British Standard
C7: Chinese standard
C96: European standard
CDBSIZE standard
JIS2401: Japanese standard
DIN3771: Germany standard
Processing method: Compression set.
CS reference: 0.3,0.4,0.5,0.51,0.53,0.6,0.66,0.75,0.79,0.8,0.9,0.97,1,1.02,1.05,1.09,1.1,
1.12,1.14,1.19,1.2,1.24,1.25,1.27,1.3,1.4,1.42,1.47,1.5,1.53,1.58,1.6,1.63,1.65,1.67,1.7,1.78,
1.8,1.83,1.9,1.98,2,2.06,2.08,2.1,2.15,2.2,2.21,2.23,2.25,2.3,2.39,2.4,2.46,2.5,2.54,2.55,2.6,
2.62,2.65,2.7,2.75,2.8,2.85,2.95,3,3.1,3.15,3.2,3.25,3.3,3.4,3.5,3.53,3.55,3.6,3.61,3.65,3.7,3.75,
3.8,3.84,4,4.1,4.3,4.4,4.5,4.55,4.6,4.7,4.75,5,5.1,5.2,5.3,5.33,5.4,5.5,5.7,5.8,6,6.2,6.3,6.5,6.7,6.99,
7,7.3,7.49,7.5,8,8.4,8.5,8.6,8.75,9,9.5,9.53,9.7,10,10.75,11,12,12.7,13,15
Color: Natural, Blue, Red, and other customized color
Sealing Type: O ring, X ring, Y ring, cord, hose, oil seal, Customized based on sample or drawing.
Other O ring materials: NBR70°,SIL70°,EPDM70°,VT75°,HNBR70°( Hardness can be customized based on requirements)
Material data sheet:
| FVMQ Fluorosilicone Rubber Parts General Material Data Sheet | ||||
| Grade | ESN9140 | ESN9150 | ESN9161 | ESN9170 |
| Gravity | 1.44 | 1.46 | 1.48 | 1.48 |
| g/cm3 | ||||
| Hardness | 39 | 51 | 60 | 70 |
| Shore A | ||||
| Tensile Strength | 10 | 9 | 9 | 8 |
| MPa | ||||
| Elongation At Break | 510 | 380 | 325 | 260 |
| % | ||||
| Tear Strength | 28 | 26 | 26 | 17 |
| kN/m | ||||
| Compression Set | 13 | 15 | 16 | 18 |
| % | /17℃×22h | /17℃×22h | /17℃×22h | /17℃×22h |
Picture shows:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.


