Measuring Range 3μG～100mg Automatic Grease Trace Moisture Meter Power 40W
SH103B Automatic grease trace moisture meter
SH103B automatic grease trace moisture tester conforms to the standard requirements of GB/T 7600, GB/T 6283, SH/T 0246, SH/T 0255 and other methods.
The Karl-Fischer (Coulomb) method was used to determine the content of trace moisture in liquids with different properties.
It has the advantages of high precision, fast speed, stable and reliable measurement data, etc. It is widely used in petroleum, chemical, electric power, environmental protection, medicine and other departments.
It can quickly determine the moisture content of alcohols, oils, lipids, ethers, esters, acids, alkanes, benzene, amines, organic solvents, pesticides, phenols, drug raw materials and other chemical, petroleum, pharmaceutical, pesticide and other products.
Fully Automatic Transformer Oil Trace Water Moisture Measurement Content Meter
Functional features:
Using 64 - bit embedded microprocessor as the main control core, embedded in the mini-operating system
Constant current detection, high precision, fast measurement speed, with background compensation function, stable and reliable
Double circuit balanced titration, the test result error is smaller, the sensitivity is higher
The electrolytic cell adopts the most water seal design, the balance time is short, the electrolyte use time is longer
The main machine has the function of automatic discharge and liquid filling, which greatly improves the working environment
Real-time electrolytic diagram to observe reagent state at any time
Large screen touch LCD display, simple operation, friendly interface
Full numeric keyboard, support 6 calculation formula, data calculation is convenient and fast
Built-in large capacity storage, more convenient to record and query measurement datal
Technical parameters
| Titration method | Electrometric titration |
| Electrolytic current | 0～400mA |
| Measuring range | 3μg～100mg() |
| Distinguish rate | 0.1μg |
| Fine degree | 3μg±20%,10μg±10%,100μg±5%,100μg以上±0.5%(No injection error is included) |
| Display mode | Chinese liquid crystal display |
| Printer | Thermosensitive type, 36 characters, Chinese output |
| Environment temperature | 5℃～40℃ |
| Power supply voltage | 220V±10% 50Hz±10% |
| Power consumption | <40W |
| Overall dimensions | 300mm×290mm×200mm |
| Heavy volume | 3.7kg |
Packing list
| S/N | Name | Quantity | Unit | Remarks |
|
|
Host | 1 | set | |
|
|
Electrolyte | 1 | bottle | 500ml |
|
|
Electrolytic cell | 1 | piece | |
|
|
Stirrer | 1 | piece | |
|
|
Silicone pad | 10 | piece | |
|
|
Discolored silica gel | 1 | piece | |
|
|
Vacuum grease | 1 | piece | |
|
|
1ml injector | 1 | piece | |
|
|
25ul micro injector | 1 | piece | |
|
|
Closed needle | 1 | piece | |
|
|
power cord | 1 | piece | |
|
|
Instructions | 1 | copy | |
|
|
Certificate warranty card | 1 | copy |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.