3 Holes Engine Coolant Corrosiveness Tester RT ～ +100℃ Timing 0 ～ 9999h ASTM D1384
SH0085 Engine coolant corrosion tester
The SH0085 antifreeze corrosion tester is designed and manufactured according to the requirements of the petrochemical industry standard SH/T 0085 "Determination of Corrosion of Engine Coolants" in the People's Republic of China. It is suitable for measuring the degree of corrosion of typical metal test pieces by high boiling point and low boiling point engine coolants and their concentrates according to the measurement methods of SH/T 0085 and ASTM D1384 standards. After upgrading, the SH0085 anti-corrosion tester comes with a silent air compressor, eliminating the need for manual air supply.
Determination of Corrosion of High Boiling Point and Low Boiling Point Engine Coolants and Their Concentrates on Typical Metal Test Pieces
Main technical specifications
| Number of detection holes | 3 holes |
| Beaker | heat-resistant glass, High end mouthless 1000ml, in compliance with SH/T0085 standard |
| Gas diffusion tube | The diffusion head is made of sand core glass, and the diameter is made of heat-resistant glass |
| Reflux condenser tube | water-cooled type, with a sleeve length of not less than 400mm |
| Equipped with a silent air compressor, there is no need to manually equip the air source. | |
| Temp control range | RT ～ +100℃± 0.1℃ |
| Air flow meter | 30 ～ 300ml/min |
| Timer | 0 ～ 9999h |
| Environmental temp | -10℃ ～ +35℃ |
| Relative humidity | ≤ 85% |
| Whole power | not exceeding 2000W |
| Working power supply | AC220V ± 10% 50Hz |
| Instrument size | 350 * 370 * 480mm L * W * H |
| Instrument weight | 28kg |
| Packaging size | 430 * 420 * 450mm L * W * H |
| Packaging weight | 34kg |
Test piece size and material:
● SH/T0085 Engine Coolant Corrosion Determination Method (Glassware Method) Test Piece
● 50 * 25 * 2mm (20 # steel, brass sheet, purple copper sheet)
● 50 * 25 * 3.5mm (cast aluminum sheet, solder sheet, cast iron sheet)
● Single center hole: diameter 7.0mm
Supporting products:
● Brass gaskets, insulation gaskets, steel gaskets, insulation sleeves, brass brackets
Note: The appearance pictures, dimensions, volume, and weight of the instrument are for reference only. If there are any updates to the instrument, there may be slight changes without prior notice.
Packing List
| S/N | Name | Quantity | Unit | Remarks |
| 1 | Host | 1 | Set | |
| 2 | power cord | 1 | Piece | |
| 3 | Corrosion test piece | 3 | Set | |
| 4 | Condenser tube | 3 | Set | |
| 5 | Gas diffusion tube | 3 | Set | |
| 6 | Fuse tube | 1 | Piece | |
| 7 | instruction manual | 1 | Copy | |
| 8 | Certificate warranty card | 1 | Copy |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.