Chemical Industry Spray Tower Scrubber 900*2250 Wet Scrubbers Air Pollution Control

Low Noise Spray Tower Scrubber For Chemical Industry

working principle

Exhaust gas is introduced into the spray tower by the fan, the inner cylinder forms a pressure chamber, and the pressure chamber is evenly distributed to each bubbling tube. The exhaust gas passes through the bubbling tube and enters the liquid absorption tank to absorb bubbling liquid, and then bubbles pass through the packing layer. The gas-liquid two phases are fully in contact with the absorption neutralization reaction. The water is sprayed on the top of the tower after being pressurized by the water pump at the bottom of the tower, and finally it is returned to the bottom of the tower for recycling, and the exhaust gas after absorbing and filtering continues to flow upwards and is sprayed. The absorption neutralization liquid ejected by the tube produces a final reaction. After neutralization reaction, the gas after dehydration and dust removal by the terminal defogging plate is discharged into the atmosphere, which can also be combined with photo-oxygen catalysis or low-temperature plasma and activated carbon gas purification equipment. After-exhaust gas reaches local or national emission standards and emission requirements

The equipment features:

1. Low noise, stable operation, simple operation, low cost, etc.
2. In addition to high dust efficiency, it can handle various gases by using syrup and water.
3. Using high-quality PP sheet, corrosion-resistant, anti-aging, long service life, and can be customized according to requirements;

Pictures