Huawei CR5D0L6XFA70 6-Port 10GBase LAN/WAN-SFP+ Flexible Card
The Huawei CR5D0L6XFA70 (Product Code: 03030QDE) is a 6-Port 10GBase LAN/WAN-SFP+ Flexible Card A(P120-A) designed for the Huawei NetEngine 40E series Universal Service Routers (USRs), including the NE40E-X3, NE40E-X8, and NE40E-X16 chassis. As a flexible subcard, it occupies one half-width flexible card slot and is also compatible with Huawei CX600 series Metro Service Platforms.
The CR5D0L6XFA70 provides six 10GE interfaces for line-rate transmitting and receiving, offering high-density 10G connectivity for IP backbone edges, metropolitan area networks (MANs), and data center deployments. The board supports hot-swapping, enabling replacement without chassis power-down.
| Feature | Description |
|---|---|
| High-Density 10G Connectivity | 6 SFP/SFP+ ports provide 10GBase LAN/WAN connectivity for high-capacity aggregation scenarios |
| Line-Rate Forwarding | Supports 6 × 10GE interfaces for line-rate transmission and reception |
| Flexible LAN/WAN Mode | Ports can be configured to work in LAN or WAN mode; 10G ports in WAN mode function only as master interfaces (Slave mode not supported) |
| Rate Adaptation | Supports GE/10GE auto-adaptation |
| Hot-Swappable | Supports board replacement without chassis power-down |
| Comprehensive Protocol Support | Supports Ethernet_II, Ethernet_SAP, and Ethernet_SNAP frame formats; full-duplex operation |
| MACsec Support | No |
| FlexE Support | No |
| Breakout Support | No |
| Parameter | Specification |
|---|---|
| Manufacturer | Huawei |
| Model | CR5D0L6XFA70 |
| Product Code | 03030QDE |
| Board Name (Silkscreen) | P101-6x10GBase LAN/WAN-SFP+-A |
| Description | 6-Port 10GBase LAN/WAN-SFP+ Flexible Card A(P120-A) |
| Compatible Platforms | Huawei NetEngine NE40E-X3 / X8 / X16, CX600-X3/X8/X16 |
| Mapping Motherboard | LPUF-120 / LPUF-120 B / LPUF-120 E |
| Dimensions (H × W × D) | 37.2 mm × 178.7 mm × 193.3 mm (0.72 in. × 6.65 in. × 7.48 in.) |
| Weight | 0.7 kg (1.54 lb) |
| Typical Power Consumption | 34.0 W – 37.4 W |
| Heat Dissipation | 110.31 BTU/hour |
| Long-term Operating Temperature | 0°C to 45°C |
| Short-term Operating Temperature | -5°C to +55°C |
| Item | Details |
|---|---|
| Supported Chassis | Huawei NetEngine NE40E-X3 / X8 / X16 |
| Supported Chassis | Huawei CX600-X3 / X8 / X16 |
| Supported Subcard Slots | LPUF-120 / LPUF-120 B / LPUF-120 E |
| Required Motherboard | Flexible Card Line Processing Unit (LPUF-120 series) |
-
Compatibility Verification: The CR5D0L6XFA70 is specifically designed for Huawei NE40E and CX600 series routers. Always verify compatibility with your specific chassis model and software release before purchasing.
-
WAN Mode Restriction: 10G ports working in WAN mode can function only as master interfaces; Slave mode is not supported.
-
FlexE Support: The card does not support FlexE.
-
MACsec Support: The card does not support MACsec. Please verify whether the compatible flexible card motherboard has MACsec capability.
-
Breakout Support: The card does not support breakout to lower-speed ports.
-
Temperature Restriction: When this subcard is used together with the CR5DLPUFF170 on an NE40E-X3, the upper limit of the short-term operating temperature of the NE40E-X3 is reduced by 5°C; the long-term operating temperature range remains unchanged.
-
Hot-Swap Operation: The card supports hot-swapping, allowing replacement without chassis power-down.
-
Product Lifecycle: The CR5D0L6XFA70 is an active product within Huawei's NetEngine portfolio, supporting current carrier and enterprise network deployments.
-
Installation: Professional installation by qualified personnel is recommended to ensure compliance with safety and performance requirements.
Product Details:
If you are interested, please let us know the specific model. We will provide the best service and the best price!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.