Huawei CR5DLPUFF070 (LPUF-240) 240G Flexible Card Line Processing Unit
The Huawei CR5DLPUFF070 (Part Number: 03054690) is a 240G Flexible Card Line Processing Unit, also known as the LPUF-240. It is a flexible card motherboard designed for Huawei's NetEngine 40E series routers, delivering 240 Gbit/s line-rate full-service processing capacity.
The board features a modular architecture with 2 half-width slots, each supporting one FPIC (Flexible Port Interface Card) subcard. This enables flexible configuration of 10GE, 40GE, 100GE, and other port types based on service requirements, providing on-demand capacity expansion and investment protection.
| Feature | Description |
|---|---|
| 240G Line-Rate Forwarding | Supports 240 Gbit/s full-service line-rate processing for large-scale traffic |
| Flexible Card Architecture | 2 half-width slots, each supporting 1 FPIC subcard; port type and quantity depend on the installed subcard |
| Hot-Swappable | Both the motherboard and FPIC subcards support hot-swapping without service interruption |
| Forwarding Mode | Supports compatible mode only; enhance mode not supported |
| MACsec Support | No (check FPIC subcard capability separately) |
| NSF/FRR | Supports Non-Stop Forwarding (NSF) and MPLS Fast Re-Route (FRR) for service continuity |
| Management Support | Enhanced CLI, SNMP, and MIB support |
| Manufacturer | Huawei |
| Model | CR5DLPUFF070 |
| Silkscreen | LPUF-240 |
| Part Number | 03054690 / 03054690-001 / 03054690-002 |
| Board Type | Flexible Card Line Processing Unit (Motherboard) |
| Forwarding Capacity | 240 Gbit/s (line-rate, bidirectional) |
| Slot Quantity | 2 half-width slots (1 FPIC per slot) |
| Dimensions (H × W × D) | 40.1 mm × 399.2 mm × 535.6 mm |
| Weight (without packaging) | 8.5 kg (18.74 lb) |
| Typical Power Consumption | 244 W |
| Typical Heat Dissipation | 791.7 BTU/hour |
| CPU | 8-core 2.3 GHz (03054690-001) / 8-core 1.5 GHz (03054690-002) |
| Long-Term Operating Temperature | 0°C to 45°C |
| Short-Term Operating Temperature | -5°C to +55°C |
| Long-Term Relative Humidity | 5% to 85% |
| Short-Term Relative Humidity | 5% to 95% |
| Storage Temperature | -40°C to +70°C |
| Minimum Software Version | V800R006C20 |
-
Compatibility Verification: This board is specifically designed for Huawei NetEngine 40E series routers. Always verify compatibility with your specific chassis model and software release (V800R006C20 or later) before purchasing.
-
FPIC Subcards Required: The CR5DLPUFF070 is a flexible card motherboard – actual port type and quantity depend on the installed FPIC subcard. Subcards must be ordered separately.
-
MACsec Support: The motherboard itself does not support MACsec. Check the capability of the specific FPIC subcard if MACsec is required.
-
Forwarding Mode Restriction: Supports compatible mode only; enhance mode is not supported.
-
Hot-Swap Procedure: Before removing the board, press and hold the OFL button for approximately 6 seconds until the OFL indicator turns on.
-
Product Lifecycle: The CR5DLPUFF070 is an active product within Huawei's NetEngine portfolio, supporting current carrier and enterprise network deployments.
-
Installation: Professional installation by qualified personnel is recommended to ensure compliance with safety and performance requirements.
Product Details:
If you are interested, please let us know the specific model. We will provide the best service and the best price!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.