Huawei CR5D00LBXF71 12-Port 10GBase LAN/WAN-SFP+ Flexible Card
The Huawei CR5D00LBXF71 (Part Number: 03030QDD) is a 12-Port 10GBase LAN/WAN-SFP+ Flexible Card A (P240-A) designed for Huawei's NetEngine 40E series universal service routers. As a flexible subcard, it must be installed in a compatible flexible card motherboard (such as the LPUF-200 series) and provides 12 × 10GE line-rate interfaces for high-density 10G aggregation in backbone, metro, and data center interconnect (DCI) deployments.
Compatible Platforms: Huawei NetEngine NE40E-X3 / X8 / X16 series routers
| Feature | Description |
|---|---|
| 12 × 10GE High-Density Ports | Provides 12 × 10GBase LAN/WAN-SFP+ ports with line-rate transmission and reception |
| Flexible Card Architecture | Requires LPUF-200 / LPUF-200-B flexible card motherboard; maximises slot efficiency |
| GE/10GE Auto-Adaptation | Supports automatic port rate negotiation (GE/10GE) |
| Hot-Swappable | Supports hot-swapping without service interruption |
| WAN Mode Restriction | 10G ports in WAN mode function only as Master interfaces; Slave mode not supported |
| MACsec Support | No (check motherboard capability separately) |
| FlexE Support | No |
| Breakout Support | No |
| Parameter | Specification |
|---|---|
| Manufacturer | Huawei |
| Model | CR5D00LBXF71 |
| Part Number | 03030QDD / 03030QDD-001 |
| Silkscreen | P240-12×10GBase LAN/WAN-SFP+ -A |
| Board Type | Flexible Card (Subcard) |
| Port Configuration | 12 × 10GBase LAN/WAN-SFP+ |
| Mapping Motherboard | LPUF-200 / LPUF-200-B |
| Dimensions (H × W × D) | 37.2 mm × 178.7 mm × 193.3 mm |
| Weight (without packaging) | 0.8 kg |
| Typical Power Consumption | 41.3 W – 52.0 W (varies by version) |
| Typical Heat Dissipation | 133.83 – 168.71 BTU/hour |
| Long-Term Operating Temperature | 0°C to 45°C |
| Short-Term Operating Temperature | -5°C to +55°C |
| Operating Mode | Full-duplex |
| Supported Frame Formats | Ethernet_II, Ethernet_SAP, Ethernet_SNAP |
| Identifier | Description |
|---|---|
| CR5D00LBXF71 | Model Number (Front Panel Silkscreen) |
| 03030QDD | Huawei Manufacturing Part Number |
| 03030QDD-001 | Part Number Variant |
| P240-12×10GBase LAN/WAN-SFP+ -A | Board Silkscreen Reference |
Important Notes
Compatibility Verification: This subcard is specifically designed for Huawei NetEngine 40E series routers and requires the LPUF-200 / LPUF-200-B flexible card motherboard. Always verify compatibility with your specific chassis model and software release before purchasing.
WAN Mode Restriction: 10G ports in WAN mode function only as Master interfaces; Slave mode is not supported.
MACsec Support: The subcard itself does not support MACsec. Check the capability of the specific flexible card motherboard if MACsec is required.
FlexE Support: FlexE is not supported.
Temperature Restriction: When this subcard is used with the CR5DLPUFF170 on an NE40E-X3, the upper limit of the short-term operating temperature is reduced by 10°C; the long-term operating temperature range remains unchanged.
Hot-Swap Operation: Supports hot-swapping, allowing replacement without chassis power-down.
Product Lifecycle: The CR5D00LBXF71 is an active product within Huawei's NetEngine portfolio, supporting current carrier and enterprise network deployments.
Installation: Professional installation by qualified personnel is recommended to ensure compliance with safety and performance requirements.
Product Details:
If you are interested, please let us know the specific model. We will provide the best service and the best price!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.