Huawei CR5D00E1NC74 1-Port 100GBase-CFP Flexible Card
The Huawei CR5D00E1NC74 (Part Number: 03030QDF) is a 1-Port 100GBase-CFP Flexible Card A (P240-A) designed for Huawei's NetEngine 40E series universal service routers. As a flexible subcard, it must be installed in a compatible flexible card motherboard (such as the LPUF-200 / LPUF-200-B) and provides 1 × 100GE line-rate interface for high-bandwidth aggregation in data center interconnect (DCI), backbone, and metro deployments.
Compatible Platforms: Huawei NetEngine NE40E series routers (including NE40E-X16A, etc.)
| Feature | Description |
|---|---|
| 1 × 100GE Port | Provides 1 × 100GBase-CFP port with line-rate transmission and reception |
| Flexible Card Architecture | Requires LPUF-200 / LPUF-200-B motherboard; occupies one half-width slot |
| Hot-Swappable | Supports hot-swapping without service interruption |
| Port Rate Adaptation | No |
| FlexE Support | No |
| MACsec Support | No (check motherboard capability separately) |
| Breakout Support | No |
| Parameter | Specification |
|---|---|
| Manufacturer | Huawei |
| Model | CR5D00E1NC74 |
| Part Number | 03030QDF |
| Silkscreen | P240-1x100GBase LAN-CFP-A |
| Board Type | Flexible Card (Subcard) |
| Port Configuration | 1 × 100GBase-CFP |
| Mapping Motherboard | LPUF-200 / LPUF-200-B |
| Dimensions (W × D × H) | 178.7 mm × 193.3 mm × 37.2 mm |
| Weight (without packaging) | 1.3 kg |
| Typical Power Consumption | 51 W |
| Typical Heat Dissipation | 165.47 BTU/hour |
| Long-Term Operating Temperature | 0°C to 45°C |
| Short-Term Operating Temperature | -5°C to +55°C |
| Operating Mode | Full-duplex |
| Compliance | IEEE 802.3 |
| Supported Frame Formats | Ethernet_II, Ethernet_SAP, Ethernet_SNAP |
| Identifier | Description |
|---|---|
| CR5D00E1NC74 | Model Number (Front Panel Silkscreen) |
| 03030QDF | Huawei Manufacturing Part Number |
| P240-1x100GBase LAN-CFP-A | Board Silkscreen Reference |
-
Compatibility Verification: This subcard is specifically designed for Huawei NetEngine 40E series routers and requires the LPUF-200 / LPUF-200-B flexible card motherboard. Always verify compatibility with your specific chassis model and software release before purchasing.
-
MACsec Support: The subcard itself does not support MACsec. Check the capability of the specific flexible card motherboard if MACsec is required.
-
FlexE Support: FlexE is not supported.
-
Hot-Swap Operation: Supports hot-swapping, allowing replacement without chassis power-down.
-
Product Lifecycle: The CR5D00E1NC74 is an active product within Huawei's NetEngine portfolio, supporting current carrier and enterprise network deployments.
-
Installation: Professional installation by qualified personnel is recommended to ensure compliance with safety and performance requirements.
Product Details:
If you are interested, please let us know the specific model. We will provide the best service and the best price!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.