High Temperature Kiln Mullite Insulating Brick Thermal Shock Resistance
Good Thermal Shock Resistance Insulation Brick nsulating Refractory Mullite Bricks For High Temperature Kiln
Good Thermal Shock Resistance Insulation Brick nsulating Refractory Mullite Bricks For High Temperature Kiln also known as mullite lightweight insulating firebrick of high purity refractory powder, according to product requirements proportion, adding organic composite filler, the vacuum extrusion molding, high temperature sintering refractory insulation mullite insulating brick .In the main phase of mullite alumina, alumina content in general 65% ~ 75%.A high degree of fire resistance, up to 1790 degrees celsius. Load softening temperature 1600 ~ 1700 degrees to start. Room temperature compressive strength of 70 ~ 260MPa. Good thermal shock resistance. The sintered mullite and fused mullite brick two .
Laurel produces a comprehensive range of Good Thermal Shock Resistance Insulation Brick nsulating Refractory Mullite Bricks For High Temperature Kiln consisting of 30-55% Alumina all of which exhibit excellent strength. For more arduous environments we offer a hand fired "super duty" Fire clay brick with a very high mechanical strength.
Typically our Good Thermal Shock Resistance Insulation Brick nsulating Refractory Mullite Bricks For High Temperature Kiln range is based upon flint clay giving it both a low iron and low alkali characteristic. Resistance to thermal shock, abrasion, chemical attack and reducing atmospheres are just some of the key criteria determining choice of product within each application. a wide range of sizes are held in stock.
| item | DLG180-1.5L | DLG170-1.3L | LG160-0.8L | LG150-0.8L | LG140-0.7L | LG125-0.5L | |
| Al2O3 % | ≥90 | ≥72 | ≥60 | ≥55 | ≥50 | ≥48 | |
| Fe2O3 % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
| Bulk Density ( g/cm3) | ≤1.5 | ≤1.3 | ≤1.0 | ≤0.8 | ≤0.7 | ≤0.5 | |
| Cold Crushing Strength (MPa) | ≥9.5 | ≥5.0 | ≥3.0 | ≥2.5 | ≥2.0 | ≥1.5 | |
| Linear Change on Reheating | ≤1% | 1800 | 1700 | 1600 | 1500 | - | - |
| ≤2% | - | - | - | - | 1400 | 1250 | |
| Thermal conductivity(350±25)℃ (W/mK) | ≤0.8 | ≤0.6 | ≤0.4 | ≤0.35 | ≤0.3 | ≤0.2 | |
Advantages :
1. Low bulk density, low thermal conductivity, good thermal insulation performance.
2. Refractory category allow direct contact of fire, suitable ofr various atmosphere
3. Good integrity with furnace lining, long service life, easy operation, could be shaped freely
4. Product specification: standard form, normal standard, shaped and special shaped bricks.
5. Can be used in various kilns because of its cheapness and general tray package. Among all of the refractory materials, it is the most widely used.
Application :
1). Gas cooker,Water heater,Gas oven, Gas boiler,Air-conditioning and so on.
2). As ceramic parts of flexible pad and channel heaters at operations of pre and postweld heat treatment; Welding process, stress-relieving, pre-heating & post heating, other resistance-heating environment
3). halogen lamps, high and low pressure uv lamps, mercury lamps, uv lamp holders and heating tubes.
4). high-power electrical applicance and all kinds of insulation device.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.