Inconel 625 ASTM B704 Hydraulic Control Line Tubing
Inconel 625 Coiled Hydraulic Control Lines
We are professional Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines suppliers from China
The outer diameter of Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines that we could do is in 1/8", 1/4", 1/2", 3/8", 3/4", 5/8"
The wall thickness of Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing that we could do is in 0.028", 0.035", 0.049", 0.065", 0.083"
Our Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines are widely used in a numerous petrochemical applications, including:
Down hole tubes
Subsea umbilical's
Process constructions
General control system
Steam supply lines
Gas transport lines
Instrumentation
The pressure that we could meet is as follows: 50MPA— 130MPA
Welcome your inquiry
Chemical composition
| Material | C | Mn | P | S | Si | Ni | Cr | Mo | N | Cu | Fe | Al | Ti | Cb+Ta |
| 625 | 0.10 | 0.50 | 0.015 | 0.015 | 0.50 | min 58.0 | 20.0-23.0 | 8.0-10.0 | ... | ... | 5.0 | 0.4 | 0.40 | 3.15-4.15 |
Mechanical properties:(Minimum value at 20°C)
Tensile Strength σb/MPa |
Yield Strength σp0.2/MPa |
Elongation σ5 /% |
760 |
345 |
30 |
Standards
Bar |
Forging |
Sheet/Strip |
Wire |
Pipe |
ASTM B446 |
ASTM B564 |
ASTM B443 |
ASTM B446 |
ASTM B444 ASTM B704 ASTM B705 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.