Casting Used Spherical Ceramic Sand Particle 1.95~2.051g/cm3 Density
Casting used Ceramsite Spherical Ceramic Of Mining Machine Spare Parts
1. Spherical ceramic sand for foundry Of Mining Machine Spare Parts
In order to reduce waste emissions and health hazards to people in classic foundry process, as well as to improve foundry efficiency, Luoyang Kailn Foundry Material Company has developed a new special foundry sand, ceramic sand.
Due to ceramic sand outstanding properties, ceramic sand has been widely used in most types of foundry process as an upgrade substitution of silica sand and special foundry sands.
Ceramsite Spherical Ceramic Of Mining Machine Spare Parts
2. CERAMIC SAND Characteristic Of Mining Machine Spare Parts
Anti Burn-on
High Reclamation Yield
Thermal Expansion Control
Wide Choice of Particle Size
Reduced Waste and Health Hazard
Good Flowability and Heat Conductivity
Low Resin Consumption and Gas Defects
| Main Chemical Component | Al.O:70~85%,Fe,O,≤5%,TiO.:3~4%,SiO::12~25% |
| Shape | Good spherical |
| Angularity Facto | ≤1.1 |
| Particle Size | 0.053mm~2.50mm |
| Bulk Density | 1.95~2.051(g/cm³) |
| Thermal Expansion | 0.13%(10 minutes at 1000℃) |
Properties(compare with other foundry sand)
| Ceramic sand | Quartz sand | Chromite | Zircon | Cerabeads | |
| Refractoriness | 1800℃/3272°F | 1730℃/3146°F | 1880℃/3416°F | 1825℃/3317F | 1825℃/3317°9 |
| Bulk density (g/cm³/b/ft') | 2/124 | 1.58/99 | 2.81/175 | 2.95/187 | 1.69/106 |
| pH | 7.3 | 6.6 | 7.9 | 5.7 | 7.2 |
|
Thermal conductivity (100~1000°℃) |
0.35～0.50(W/mK | 0.255(W/mK) | 0.258(W/mK) | 0.305(W/mK) | 0.223(W/mK) |
|
Lin.exp.coeff. (20~600°℃,10⁸ ×K') |
7.2 | 23 | 7.5 | 4.1 | 4.0 |
| Mohs' hardness | 6.5~7.5 | 6.0~7.0 | 5.5~6.0 | 7.0~8.0 | 5.0~5.5 |
| Mineralogical composition | Mullite+Corundum | Quartz +Feldspar | Chromite | Zircon |
Mullite (sintered mulite) |
| Grain shape | Spherical | Angular | Angular | Semi-angula | Spherical |
Ceramsite Spherical Ceramic Of Mining Machine Spare Parts
3. Parts of papticle size distribution Of Mining Machine Spare Parts
| spec. |
AFS30 |
AFS40 |
AFS50 |
AFS60 |
AFS65 |
AFS75 |
AFS100 |
AFS125 |
AFS150 |
|
| mesh | micron | |||||||||
| 10 | 1700 | |||||||||
| 14 | 1180 | |||||||||
| 18 | 850 | ≤5 | ||||||||
| 26 | 600 | 15~30 | ≤5 | ≤5 | ||||||
| 36 | 425 | 30~50 | 20~40 | 10~25 | ≤10 | ≤5 | ||||
| 50 | 300 | 20~35 | 25~40 | 25~35 | 15~35 | 10~25 | ≤10 | |||
| 70 | 212 | ≤10 | 10~30 | 25~35 | 25~35 | 15-30 | 10~30 | ≤3 | ≤2 | |
| 100 | 150 | ≤5 | ≤10 | 5~25 | 25~35 | 25~40 | 25~45 | 10~30 | 0~20 | ≤5 |
| 140 | 106 | ≤5 | ≤10 | 5~20 | ≤25 | 20~40 | 35~55 | 30~50 | 5~25 | |
| 200 | 75 | ≤2 | ≤5 | ≤5 | ≤10 | 15~35 | 25~45 | 40~60 | ||
| 281 | 53 | ≤1 | ≤1 | ≤1 | ≤5 | ≤10 | 0~20 | 25~35 | ||
| PAN | PAN | ≤0.5 | ≤0.5 | ≤0.5 | ≤2 | ≤5 | ≤15 | |||
|
AFS average finess range |
25~35 | 35~45 | 45-55 | 55-65 | 60-70 | 70~80 | 95~110 | 120~135 | 145~165 | |
Ceramsite Spherical Ceramic Of Mining Machine Spare Parts
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.