Economic Environmentally Friendly And Yield-Increasing Mineral Processing Ball Mill
Economic Environmentally Friendly And Yield-Increasing Mineral Processing Ball Mill
The ore dressing ball mill is the main equipment in mineral processing, used for separating and screening minerals to improve the quality of selected ores.
Working principle
Materials enter the cylinder through the feed end. When the cylinder rotates, the grinding body is lifted to a certain height under the action of inertia, centrifugal force, and friction, then falls to crush the materials. After coarse grinding in the first chamber, the materials enter the second chamber for further grinding, and finally discharge through the discharge grate, completing the grinding operation.
Application scope
Suitable for powder grinding and processing in industries such as mining, lime, chemical, cement, construction, and fly ash. According to different discharge methods, it can be divided into lattice type and overflow type, respectively suitable for coarse grinding and fine grinding operations.
- The tube mill adopts various drive modes including edge single drive, central drive, and multi-point meshing edge drive; the drive systems include asynchronous motor + reducer + pinion + gear and synchronous motor + air clutch + pinion + gear.
- It generally uses a supporting method with static and dynamic pressure bearings at both ends, employing fully enclosed self-aligning 1200-line contact 'rocking type' bearings, and can also use single or double sliding shoe static and dynamic pressure supporting methods or full static pressure support.
- Large open gears are designed according to American AGMA standards, equipped with reliable gear covers and automatic glycerin spray lubrication devices.
- The cylinder is a key component of the mill. Finite element analysis is conducted on it by using a computer to ensure its reliability in use.
- Large and medium-sized mills are equipped with slow drive devices.
- Large and medium-sized mills are equipped with high and low-pressure lubrication stations.
- The control and protection system uses PLC control.
Product parameters Of Ore Grinding Mill
Main Technical Parameters of Wet Grate Ball Mill:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Main Technical Parameters of Overflow Ball Mill:
Model |
Cylinder diameter | Cylinder length | Effective volume | Rotate speed | Max. ball loading capacity | Motor | Size (L×W×H) |
Weight |
|
| motor | speed | ||||||||
| mm | mm | m3 | r/min | t | kw | r/min | m | t | |
| MQY15×30 | 1500 | 3000 | 5 | 26.6 | 9 | 95 | 742 | 7.4×3.4×2.8 | 18.5 |
| MQY15×36 | 1500 | 3600 | 5.7 | 26.6 | 10.6 | 95 | 742 | 8.0×3.4×2.8 | 17.22 |
| MQY18×61 | 1830 | 6100 | 13.4 | 24.5 | 24.6 | 220 | 736 | 10.2×5.1×4.0 | 37.3 |
| MQY21×30 | 2100 | 3000 | 9.4 | 22.1 | 15 | 200 | 740 | 8.5×4.65×3 | 45 |
| MQY24×30 | 2400 | 3000 | 12.2 | 21 | 22.5 | 250 | 980 | 8.8×4.7×4.4 | 55 |
| MQY24×70 | 2400 | 7000 | 26.66 | 21 | 48 | 475 | 740 | 14.3×5.8×4.4 | 67 |
| MQY27×36 | 2700 | 3600 | 18.5 | 20.5 | 39 | 400 | 187.5 | 9.8×5.8×4.7 | 61.34 |
| MQY27×40 | 2700 | 4000 | 20.5 | 20.24 | 38 | 400 | 187.5 | 10.4×5.8×4.7 | 70 |
| MQY27×45 | 2700 | 4500 | 23.5 | 20.5 | 43.5 | 500 | 187.5 | 12.5×5.8×4.7 | 76 |
| MQY27×60 | 2700 | 6000 | 34.34 | 19.5 | 53 | 630 | 589 | 13.5×5.9×4.7 | 71.2 |
| MQY28×54 | 2800 | 5400 | 30 | 19.5 | 55.2 | 630 | 167 | 13×5.83×4.7 | 97.8 |
| MQY28×80 | 2800 | 8000 | 43 | 20 | 78.6 | 800 | 137 | 16.5×7.3×5 | 115 |
| MQY30×11 | 3000 | 11000 | 69.2 | 17.3 | 100 | 1250 | 429 | 28.9×3.8×5 | 227.8 |
| MQY32×36 | 3200 | 3600 | 26.3 | 18.3 | 48.4 | 500 | 167 | 14.3×7.3×6 | 116.94 |
| MQY32×40 | 3200 | 4000 | 29.2 | 18.2 | 60 | 560 | 980 | 16.7×7.3×6 | 121.4 |
| MQY32×45 | 3200 | 4500 | 32.9 | 18.3 | 60.5 | 630 | 167 | 13×7.0×5.82 | 124.23 |
| MQY32×54 | 3200 | 5400 | 39.4 | 18.3 | 73 | 800 | 167 | 14.2×7.0×5.82 | 129 |
| MQY32×64 | 3200 | 6400 | 46.75 | 18.3 | 86 | 1000 | 167 | 15.2×7.0×5.8 | 140 |
| MQY32×75 | 3200 | 7500 | 55.5 | 18.3 | 102 | 1250 | 743 | 17.7×8.4×6.3 | 154 |
| MQY32×90 | 3200 | 9000 | 64.2 | 18.3 | 106.6 | 1250 | 150 | 18.5.7.3×6 | 173 |
| MQY34×45 | 3400 | 4500 | 37 | 18.4 | 74.6 | 800 | 167 | 11.5×7×6.1 | 129.8 |
| MQY34×56 | 3400 | 5600 | 45.8 | 17.9 | 84.3 | 1120 | 985 | 16.7×7.6×6.3 | |
| MQY36×45 | 3600 | 4500 | 41.4 | 17.25 | 76 | 1000 | 167 | 13×7.3×6.3 | 144.1 |
| MQY36×50 | 3600 | 5000 | 46.7 | 17.5 | 85.96 | 1250 | 167 | 15×7.6×6.2 | 150 |
| MQY36×50 | 3600 | 5000 | 46.7 | 17.3 | 85.96 | 1250 | 429 | 23×4.6×6.3 | 176 |
| MQY36×56 | 3600 | 5600 | 55.4 | 17.76 | 106.3 | 1250 | 750 | 14.4×8×6.3 | 159.7 |
| MQY36×60 | 3600 | 6000 | 55.7 | 17.3 | 102.5 | 1250 | 429 | 24×4.6×6.3 | 138.73 |
| MQY36×60 | 3600 | 6000 | 54 | 17.3 | 102 | 1250 | 167 | 15.6×8.3×6.3 | 162.7 |
| MQY36×61 | 3600 | 6100 | 55.36 | 17.76 | 106.3 | 1200 | 980 | 15.8×8.5×6.2 | 164.1 |
| MQY36×85 | 3600 | 8500 | 79 | 17.4 | 131 | 1800 | 743 | 20×8.2×7.1 | 251.89 |
| MQY36×90 | 3600 | 9000 | 83.5 | 17.4 | 138 | 1800 | 743 | 28×4.6×5.6 | 286 |
| MQY38×67 | 3800 | 6700 | 70 | 16.5 | 130 | 1400 | 743 | 19×8.2×7.1 | 185.2 |
| MQY40×60 | 4000 | 6000 | 69.8 | 16.0 | 126 | 1500 | 200 | 17.4×9.5×7.6 | 203.5 |
| MQY40×67 | 4000 | 6700 | 78 | 16.0 | 136.3 | 1600 | 200 | 15.6×9.6×7.3 | 206.2 |
| MQY40×135 | 4000 | 13500 | 155 | 16 | 233 | 3300 | 200 | 23×10×4.9 | 343 |
| MQY43×61 | 4270 | 6100 | 80 | 15.67 | 144 | 1750 | 200 | 14×10×7.7 | 215.3 |
| MQY50×64 | 5030 | 6408 | 120 | 14.4 | 251 | 2600 | 200 | 14.6×11×9.1 | 318.5 |
| MQY50×83 | 5030 | 8300 | 152.3 | 14.4 | 266 | 3300 | 200 | 22×10.5×9 | 402.6 |
| MQY55×65 | 5500 | 6500 | 143.3 | 13.8 | 264 | 3400 | 200 | 18.5×9.8×8.9 | 451.5 |
| MQY50×85 | 5500 | 8500 | 187.4 | 13.8 | 335 | 4500 | 200 | 20.5×12×9.8 | |
| MQY55×65 | 5500 | 6500 | 143.3 | 13.8 | 264 | 3400 | 200 | ||
| MQY50×85 | 5500 | 8500 | 187.4 | 13.7 | 335 | 4500 | 200 | ||
| MQY55×88 | 5500 | 8800 | 191.5 | 13.7 | |||||
| MQY60×95 | 6700 | 9500 | 249.3 | 13 | |||||
| MQY67×116 | 6700 | 11600 | 385 | 12.5 | |||||
| MQY73×115 | 7300 | 11500 | 495 | 12 | |||||
| MQY80×120 | 8000 | 12000 | 570.5 | 11.5 | |||||
Product Display Of Ore Grinding Mill
FAQ
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
After Sales Service
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.