Slickline Wireline JU Type Pulling Tool With Outer Fishing Necks
slickline Wireline JU Type Pulling Tool With Outer Fishing Necks
JU Type Pulling Tools Wireline Pulling Tool
I. Introduction:
A JU type pulling tool is used to fish the tools or instruments with outer fishing necks (such as balance bar, stopper and restrictor), which can move upward to slip out of hand and is divided into three types: JUC, JUS and JUL.
II. General Technical Parameters:
|
Size |
Actual OD |
Fishing neck |
Connection |
Grasping diameter |
Grasping distance |
PN. |
||
|
JUC |
JUS |
JDL |
||||||
|
1-1/4＂ |
1.291＂ |
1.187＂ |
15/16UN |
0.875＂ |
1.937＂ |
2.687＂ |
|
W31-04.**.00 |
|
1-3/8＂ |
1.375＂ |
1.187＂ |
15/16UN |
1.187＂ |
1.875＂ |
|
|
W31-04.**.00 |
|
1-1/2＂ |
1.422＂ |
1.187＂ |
15/16UN |
1.187＂ |
1.093＂ |
1.844＂ |
|
W31-04.**.00 |
|
1-5/8＂ |
1.625＂ |
1.187＂ |
15/16UN |
1.187＂ |
1.093＂ |
|
|
W31-04.**.00 |
|
2＂ |
1.86＂ |
1.375＂ |
15/16UN |
1.375＂ |
1.437＂ |
2.125＂ |
4.13＂ |
W31-04.**.00 |
|
2-1/2＂ |
2.25＂ |
1.375＂ |
15/16UN |
1.75＂ |
1.313＂ |
2.188＂ |
4.13＂ |
W31-04.**.00 |
|
3＂ |
2.796＂ |
1.75＂ |
15/16UN |
2.313＂ |
1.437＂ |
2.125＂ |
4.13＂ |
W31-04.**.00 |
|
4＂ |
3.75＂ |
2.313＂ |
1-1/16UN |
3.125＂ |
2.313＂ |
3.373＂ |
4.13＂ |
W31-04.**.00 |
Note. Pay attention to the model of grasping distance when ordering goods. More customized parts are available upon request.
III. Structural features
JU pulling tool is composed of upper contact, main spring, secondary spring, mandrel, sliding block, outer cylinder, fishing claw, shear pin, etc.
Welcome to contact us at any time.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.