Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch
Nickel Alloy Wireline Pulling Tool Fishing OD 1.375 Inch
GR Pulling Tool Wireline Pulling Tool
Ⅰ. Introduction
GR pulling tool is composed of GU shear up adaptor (upward shear adaptor) and GS pulling tool (without shear pin), which can be released by upward shear. It is usually used for fishing lock mandrel, packers ,and bridge plugs with internal fish necks.
Ⅱ. Technical parameters of common specifications
|
Szie |
Actual OD |
FN |
Fishing OD |
Connection |
Lower connection thread |
|
2″ |
1.81″ |
1.375″ |
1.38″ |
15/16″-10UN |
1/2-13UN″ |
|
2.5″ |
2.25″ |
1.375″ |
1.81″ |
15/16″-10UN |
5/8-11UN″ |
|
3″ |
2.72″ |
1.75″ |
2.31″ |
1-1/16″-10UN |
5/8-11UN″ |
|
3.5″ |
3.11″ |
2.313″ |
2.62″ |
1-1/16″-10UN |
5/8-11UN″ |
Technical parameters can also be according to user requirements
III. Maintenance
1. After the tool is disassembled, check the damage of each component and replace the damaged parts.
2. When assembling, apply a thin layer of grease on the thread surface.
3. After assembly, the fishing neck is attached with thread protector and marked for later use.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.