Oilfield Alligator Grab Wireline Fishing Tool 1.375 Inch Fish Neck
Oilfield Alligator Grab Wireline Fishing Tool 1.375 Inch Fish Neck
Alligator Grab Wireline Fishing Tool
Introduction
The alligator grab is a tool used to fishing from tubing. In most cases, it only use when other fishing tools cannot be salvaged.
General Technical Parameters
| Size | FN | Connection | Code |
| 2" | 1.375 | 15/16-10UN | W45-05.01.00 |
| 1.5" | 1.375 | 15/16-10UN | W45-05.02.00 |
| 2.25" | 1.75 | 1-1/16-10UN | W45-05.03.00 |
| 2.75" | 1.375 | 15/16-10UN | W45-05.04.00 |
Method
1. Connect the Alligator grab to the tool string.
2. Loosen the adjusting nut.
3. Install the shear pin (or use a thin iron rod to push it from the end of the pin into the skirt hole and hang it).
4. Adjust the adjusting nut and compress the spring to the proper position.
5. Run the tool; shake down to cut the shear pin after reaching the position, (or releas the tool string to release the pin);
6. Lift the tool upwards; if the tool is blocked, please shake it up to the ground.
Maintenance
Ater use, please remove greasy dirt, debris, and sand debris in time to prevent the tool from being blocked .
Tools Can Be Manufactured To Any Size Required. Welcome to contact us at any time.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.