Wireline  Overshot Wireline Pulling Tool

I. Overview:
The slip overshot is used to salvage tools or objects that have no conventional salvage necks in the well. After being shaken down, the salvaged objects can be caught, and then the tools can be lifted out. The structure is simple and easy to use.
II. Common technical parameters:

Note. More customized parts are available upon request.
III. Structural features and use:
The slip overshot is composed of an upper joint, a cylinder, a spring, and slips. Its structure is simple and easy to use.
When installing, install the slips (order 4) from the upper end of the cylinder (order 2), then install the spring (sequence 3), and finally tighten the upper joint (sequence 1) to complete the assembly.
After salvaging the tool, unscrew the upper joint (preface 1), take out the spring (preface 3) and slips (preface 4) in sequence, and finally remove the salvaged object.
IV, matters needing attention:
1. Before use, pay attention to the fishing range of the tool and the size of the salvage;
2. After use, pay attention to maintenance tools and do necessary anti-corrosion treatment.

Welcome to contact us at any time.