2 inch RS Type Pulling Tool Wireline Pulling Tool​

I. Overview:
The R-type fishing tool is an external fishing tool. The structure principle is similar to the JU type fishing tool, the outer fishing neck is grasped by a special claw, and it can be shaken downward to release the hand. According to the different grip distance, it can be divided into three types: RB, RS and RJ
II. The main technical parameters of the tool:

III. Salvage operation steps:
1. Connect the fishing tool to the basic tool string and go down the well;
2. When quickly descending to the predetermined position, slowly lower the tool string;
3. Wait for the tool to grab the outer salvage neck and shake upwards;
4. When the upward shock cannot be lifted, you can continue to shock upward to get rid of.
IV, the treatment after the tool is released:
After pulling out the tool, insert the jam-releasing tool or screwdriver into the jam-releasing place, pry open the fishing claw, open the fishing claw, and then release the tool.
V. Matters needing attention:
Before running the tool, check that there is no looseness in the thread of the tool connection.

Any size can be customized according to customer needs,Welcome to contact us at any time.