Anti Rust FWG Plug Wireline Lock Mandrel Wear Resistant

Wireline Lock Mandrel FWG plug

Wireline Lock Mandrel FWG plug Bypass Blanking Plugs with Removable Mandrels are positive blank-off services designed

to seal off pressure from above and below. Wireline Lock Mandrel FWG plugs Blanking Plugs are equipped for Bottom No-Go

landing in Model “R” NonPorting Seating Nipples. The plugs are compatible with normal wireline equipment and procedures

Product description:

Running of the plug:

1. firstly, connect the valve cap to the X/XN lock cylinder up and down to the preset working cylinder;

2. Connect the balance bar to the SB fishing tool and run down the well;

3. Lower it slowly after reaching the depth to be dropped, so that the P-type balance bar can enter the sealing hole of the bonnet;

4. Shook down slightly to make the P-type balance bar reach its position;

5. Shook down to cut off the shear pin of the running SB fishing tool;

6. Trip out and run the tool. At this time, the P-type balance bar remains in the well to complete the plugging. Note: Before running in the well, check whether the seal is intact.

 Salvage of plugs:

1. run SB-type fishing tool to fish out p-type balance bar first;

2. Run GR fishing tool to fish X/XN lock cylinder.

Welcome to contact us at any time