130W Wall mounted Energy recovery ventilator Air recuperator wall Heat recovery ventilation HRV

Energy recovery ventilation (ERV) is the energy recovery process of exchanging the energy contained in exhausted building air and using it to treat (precondition) the incoming outdoor ventilation air.

Features

– Low noise and high energy recovery efficiency.
– It is environment-friendly.
– The product is light and easy to install.
– Energy recovery ventilator equipment
– Domestic ventilation unit
– Hepa filter (40T)
– Bypass mode
– Energy saving

► SPECIFICATION

► SIZE

► ADVANTAGE

★ PM2.5 removal effect diagram

solubility

minute            10      20      30       40      50       60     minute         10       20      30       40       50       60

When the machine is started for 1 hour, PM2.5 decreases by about 25 ug / m³, which is the high quality air standard,

formaldehyde drops to about 0.3 mg / m³

★ Efficient filtration

Primary filter

Large filtration area and large dust capacity

The spreading area of primary filter is about 3 m³,It can filter large particles,

block mosquitoes, hair, etc.

Characteristic:

The primary filter is made of fiber cotton,It has the characteristics of large filtering area, large dust capacity, low wind speed and low resistance. The service life of the follow-up filter screen depends on this layer.

Medium efficiency filter

More than 97% of PM2.5 was filtered at one time

High efficiency filter

H13 medical grade filter screen, single filtration 99.95% PM2.5

Characteristic:

PTFE composite filter element is adopted,compared with the traditional glass fiber, PTFE filter paper will not emit chemical gas

The spreading area of primary filter is about 30 m^3,depending on the service environment, it is generally replaced within 1-2 years.