Truck Spare Parts 45480-1820 Drag Link Diesel Japanese Truck Chasis Parts Hino 500 Truck

Truck Spare Parts 45480-1820 Drag Link Diesel Japanese Truck Chasis Parts Hino 500 Truck

2. Detailed Product Pictures

Inspection Procedures – Wear Limits
Grab and try to move the tie rod cross tube in any direction. If movement or looseness is felt between the tie rod ends and the tie rod arms, remove and replace the tie rod ends. Check the seals for rips at the time of lubrication.

If removed, use a torque wrench to measure the ball stud turning torque value. If it takes less than 5 inch pounds of torque to rotate the stud, replace the tie rod end.

For inspection station purposes, place the vehicle out of service if lateral movement (using hand pressure only) exceeds 1/8″. Do not use leverage as this will overcome the preload spring.

3.Product Advantages

- 100% Same Original Parts Finishing

- Long-lasting Performance

- Best for Parts Replacement

This is a part found on some vehicles with a steering box, not with rack and pinion steering. The arm coming off the steering box (pitman arm) may have two tie rods, one to each front wheel, another version connects the 2 front wheels to each other with one long tie rod and then needs just one tie rod to the steering box ; that tie rod is called a drag link.

In general, the tie rod between the wheels is adjusted for toe in alignment, then the drag link can adjust the steering wheel to be centered when the tires point straight ahead.

4. FAQs

Q: What is your service process?

A:Please use the contact form down below to send us inquiry. We will get back to you in the next 8 hours and confirm the parts you need and quote you prices.

Q: If I am not satisfied with the products, can I returns goods?

A:Yes, we offer exchange and repair service under warranty. Please contact us before you return.

Q: How can I trace my order?

A:We will send you the tracking number by email.