Nobel Biocare Replace Ti 6AI 4V ELI Dental Implant Temporary

Nobel Biocare Replace® Titanium Temporary Abutment Compatible with

NP 3.5mm/ RP 4.3mm/ WP 5.0mm(Engaging & Non-Engaging)

Material:
Ti 6AI-4V ELI (Supply from Germany)

Feature:

* Titanium interface abutment
* 1pc Screw Included

* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Exterior retentions for more cementation bonding

Specific design ensures a stable union, reinforcing the structure of zirconium in the areas of greatest stress, softening edges and ensuring the service life of the prosthesis.

Furthermore, the saving is also shown in the less time needed when working on the most sensitive part of the prosthesis, the adjustment with the implant.
 

Approved by CE, ISO 9001, ISO 13485

Points of NobelReplace™ :

Zirconia abutments are fabricated in two geometries for anterior and posterior specific restorations. Abutments are through and through zirconia with a removable metal index converter (Fig.13), suitable for "bake on" procedures. The converter is a platform diameter color coded (NP fuchsia 3.5, RP yellow 4.3, WP blue 5.0) piece of metal press fit in to the bottom of each zirconia abutment. This converter transforms the hexagonal indexing feature of the abutment in to a tri lobe indexing feature. The angulation (10°) of angled abutments is machined in relation (away) to one of the lobes of the indexing tri lobe. Sloping collars also are designed to coincide with the lowest point of the collar at one of the lobes. Zirconia abutment specific final screws are included with each abutment.
 

NP (3.5mm platform) zirconia abutments are only available for anterior restorations. Two straight abutments with a collar height of 1.3mm and 2.2mm complement two angled (10°) abutments with a collar height choice of 1.3mm and 2.1mm.

RP (4.1mm platform) anterior straight (Fig.14, top row) abutments are produced with a choice of two (1.6, 2.4mm) collar heights and angled (10°) abutments (Fig.14, bottom row) are also offered with a choice of two (1.5, 2.3mm) collar heights. Straight posterior abutments (Fig.15, top row) are available with two collar heights of 1.6mm and 2.4mm while angled (15°) posterior abutments (Fig.15, bottom row) are also machined with a choice of two collar heights of 1.6mm and 2.2mm.
 

WP (5.0mm platform) anterior straight abutments are provided with a choice of two (1.5, 2.5mm) collar heights and angled (10°) abutments are also offered with a choice of two (1.4, 2.5mm) collar heights. Straight posterior abutments are available with two collar heights of 2mm and 2.8mm while angled (15°) posterior abutments are also available with a choice of two collar heights of 1.8mm and 2.4mm.

6.0 platform diameter zirconia abutments are not offered from Nobel Biocare™