Astra Tech Osseospeed® Titanium Angled Abutment RP 3.5-4.0mm (Aqua)/ WP 4.5-5.0mm (Lilac) -- 15°/25° Degree

One Piece 15 Degree Astra Tech Osseospeed Angled Abutments

Astra Tech Osseospeed® Titanium Angled Abutment

RP 3.5-4.0mm (Aqua)/ WP 4.5-5.0mm (Lilac) -- 15°/25° Degree

Desciption:

This angled abutment comes with a screw that takes a .050/1.27mm hex driver

This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)

Angled abutments are available for cases where implants are not able to provide alignments leading to clinical parallelism.

15°/25° Angled Abutments in three cuff heights for pre-angulation.

Angled abutments are designed to be used with cemented prostheses.

They offer the clinician a wide range of three-dimensional options.

Material:
Ti 6AI-4V ELI (Supply from Germany)

Feature:

* Titanium interface abutment
* 1pc Screw Included

* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility

* Can production Custom interface
 

Approved by CE, ISO 9001, ISO 13485

Points of Astra OsseoSpeed™ Straight Abutment:

TiDesign™ abutments are manufactured with a hex for indexing and are packaged as a kit with a final screw. TiDesign™ stock titanium abutments are available for all three (3.0 yellow, 3.5/4.0 aqua, 4.5/5.0 lilac) implant/abutment interface connection groups.

3.0 TiDesign™ abutments are machined with a emergence profile of 4.0mm and a choice of collar heights of 1mm, 2mm and 2.4mm. The 1mm and 2mm collar height abutments are straight and the 2.4mm collar height abutment has a 15 degree angle machined in relation to the flat side of the hex. Number markings indicate the emergence profile and a single black line indicates the 3.0 implant/abutment connection group.

Straight 3.5/4.0 TiDesign™ abutments are available with a choice of three emergence profiles (4.5, 5.5, 6.5mm) and a collar height of 1.5mm or 3mm for each emergence profile. Two angled abutments with a angulation of 20 degrees and a collar height of 3mm with a choice of two (4.5, 5.5mm) emergence profiles are also offered. Number markings indicate the emergence profile and a double black line indicates the 3.5/4.0 implant/abutment connection group.

4.5/5.0 connection diameter TiDesign™ abutments are machined with two (5.5, 6.5mm) emergence profiles and either a 1.5mm or 3mm collar. One 20 degree angled abutment with a emergence profile of 5.5mm and a collar height of 3.5mm is also available. Number markings indicate the emergence profile and the absence of a black line indicates the 4.5/5.0 implant/abutment connection group.