Premilled Interface Nobel Biocare Replace Ti Base Abutment

Nobel Biocare Replace® Titanium Ti-Base Abutment Compatible

NP 3.5mm/ RP 4.3mm/ WP 5.0mm/ SW 6.0mm

Material:
Ti 6AI-4V ELI (Supply from Germany)

Feature:

* Titanium interface abutment
* 1pc Screw Included

* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Exterior retentions for more cementation bonding

Specific design ensures a stable union, reinforcing the structure of zirconium in the areas of greatest stress, softening edges and ensuring the service life of the prosthesis.

 
Furthermore, the saving is also shown in the less time needed when working on the most sensitive part of the prosthesis, the adjustment with the implant.
 
Approved by CE, ISO 9001, ISO 13485
 

Points of NobelReplace™ Tianium Abutment:

Titanium abutments are designed with a sloping collar as a straight (Fig.11, top row) and angled (Fig.11, bottom row, 15°) version. The angle and lowest point of the sloping collar are machined in relation to one of the lobes of the tri lobe indexing feature. Color coding follows the prevailing color coding system (NP fuchsia 3.5, RP yellow 4.3, WP blue 5.0, green 6.0) for platform diameter identification. Each abutment is packaged with a final screw to make a complete kit. NP and RP straight and angled abutments are available in two collar heights of 1 and 3mm. WP straight and angled abutments are fabricated in two collar heights of 0.5 and 3mm. Both 6.0 straight and angled abutments are offered in one collar height of 0.5mm.