Nobel Biocare Replace® Impression Coping Transfer Closed/Open Tray Compatible NP 3.5mm/ RP 4.3mm/ WP 5.0mm
NP 3.5mm Nobel Biocare Replace Dental Implants Abutment
Nobel Biocare Replace® Impression Coping Transfer Closed/Open Tray Compatible
NP 3.5mm/ RP 4.3mm/ WP 5.0mm
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
- Titanium interface abutment
- Precision machined up to ± 5µm
- Combination of high fatigue strength
- Superior level of biocompatibility
- Exterior retentions for more cementation bonding
Approved by CE, ISO 9001, ISO 13485
|
|
TRANSFER |
A |
B |
|
| 17.004 | NP | 3,50 | 3 lobe | |
| 17.005 | RP | 4,30 | 3 lobe | |
| 17.006 | WP | 5,00 | 3 lobe | |
Points of Nobel Biocare Replace™, Replace™ Select Impression Coping Transfer:
Fig. 6
Indirect impression copings designed for the closed tray impression technique are produced in two heights of 9mm (Fig.7, low profile) and 13mm (Fig.6, regular profile). Low profile and regular profile impression copings are produced in two emergence profiles for each of the four implant/abutment platforms. Both low and regular profile impression copings share the same platform diameter specific emergence profiles. The color coding follows the prevailing color identification scheme and the fixation screw can be operated by hand or with a Unigrip™ driver.
NP (3.5mm platform, fuchsia) impression copings are machined with a choice of a
Fig. 7
3.5 and a 4.5mm emergence profile while RP (4.1mm platform, yellow) impression copings are offered with a choice of 4.3mm and 5.3mm emergence profiles. WP (5.0mm platform, blue) impression copings are available with a emergence profile of 5mm and 6mm while 6.0 (green) impression copings are machined with a choice of 6mm and 7mm emergence profiles.
Fig. 8
Direct impression copings (Fig.8) designed for the open tray impression technique are produced in one height of 9mm and two emergence profiles for each of the four implant/abutment platforms. The color coding follows the prevailing color identification scheme and the fixation screw can be operated with a Unigrip™ driver.
NP (3.5mm platform, fuchsia) impression copings are machined with a choice of a 3.5 and a 4.5mm emergence profile while RP (4.1mm platform, yellow) impression copings are offered with a choice of 4.3mm and 5.3mm emergence profiles. WP (5.0mm platform, blue) impression copings are available with a emergence profile of 5mm and 6mm while 6.0 (green) impression copings are machined with a choice of 6mm and 7mm emergence profiles.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.