Ultra Precision NP 3.0mm RP 3.5mm Dental Implant Analogue

Astra Tech OsseoSpeed® Analog Compatible with

NP 3.0mm/ RP 3.5(4.0)mm/ WP 4.5(5.0)mm

Material:

Stainless Steel 303F / Titanium GR5

Feature:
* Reproducibility
* Precision machined up to ± 5µm
* Position indicator & Level stopper for 3D print & Stone model
* Anti-rotate design

Head that reproduces the implant system joint.
Position indicator and level stopper support precise positioning of removable gingiva mask.
Gentle retaining area to easily position the soft gum in the working model.
Effective circuit and self-locking cross retainers that, inside the plaster, provide extraordinary embedding even in cases of abutment drilling on model.
Its discrete size means that analogues can be easily fitted, despite the implants being close together or not parallel.

Approved by CE, ISO 9001, ISO 13485

Points of Astra OsseoSpeed™ Analogue:

Fixture level old style
Three analogs specific to the three platform diameter groups (3.0, 3.5/4.0, 4.5/5.0) are offered. The analogs are not color coded in accordance to the platform diameter group color identification scheme. Analogs for 3.0 implants are imprinted with the number 3.0 and have a single ring machined circumferentially at the bottom third of the analog body. 3.5/4.0 platform diameter group analogs are marked with the numbers 3.5/4.0 and two rings machined circumferentially at the bottom third of the analog body. 4.5/5.0 platform diameter group analogs are not marked with any numbers but three rings machined circumferentially at the bottom third of the analog body.

Fixture level new style
Three analogs specific to the three platform diameter groups (3.0, 3.5/4.0, 4.5/5.0) are offered. The analogs are color coded in accordance to the platform diameter group color identification scheme. Analogs for 3.0 implants are colored yellow, 3.5/4.0 platform diameter group analogs are aqua and 4.5/5.0 platform diameter group analogs are lilac.

OsseoSpeed™ Profile

Only one implant analog for the OsseoSpeed™ Profile implant product line is available. The analog has the same sloped implant/ abutment interface configuration as the implant. No color coding or markings are present for identification. The Profile analogs can not be interchanged with standard OsseoSpeed™ implants.