Biohorizons Internal® Impression Coping Transfer Closed/Open Tray Compatible 3.0mm/ NP 3.5mm/ RP 4.5mm/ WP 5.7mm

Material:

Ti 6AI-4V ELI (Supply from Germany)

Feature:
- Titanium interface abutment
- Precision machined up to ± 5µm
- Combination of high fatigue strength
- Superior level of biocompatibility
- Exterior retentions for more cementation bonding

Approved by CE, ISO 9001, ISO 13485

Points of Biohorizons Internal, Tapered Internal Implant Impression Coping Transfer:

Although the 3 inOne abutment (Fig.4) supplied with most implants can be used as a indirect (closed tray) impression coping, a ball top screw (Fig.4, right) should be used instead of the included abutment screw at the time of impression taking. A universal ball top screw (Fig.4, right, catalog # PXBT) is available for all platform diameters.

Dedicated impression copings with different emergence profiles for the indirect (Fig.4, closed tray) and direct (Fig.6, open tray) fixture level impression technique are also offered for all platform diameters. BioHorizons® carries non hexed impression copings in their portfolio, these impression coping should only be used after careful deliberation because if the proposed prosthetic design needs to be changed after impression taking a time consuming second impression with hexed impression copings may need to be taken.

The 3 inOne impression coping and all other impression copings are color coded according to platform diameter (yellow 3.5mm, green 4.5mm and blue 5.7mm). Dedicated impression copings are offered in three emergence profile diameters for each platform diameter, congruent with available transmucosal healing abutment emergence profiles.

Abutment for Screw impression copings see external hex Abutment for Screw section above.