52mm*23mm*28mm Hotbed 3d Printer Special MOS Tube Extension Current 50A 5-40V
52mm*23mm*28mm Hot Bed Special MOS Tube Extension Current 50A 5-40V
Description of Hot Bed Special MOS Tube Extension :
1. The module uses MOS tube (or relay), the maximum load: DC 40V/50A (relay, AC 250V/10A).
2.Using optocoupler patch isolation, driving ability, stable performance; trigger current 5mA;
3.Module operating voltage 5 ~ 40V;
4.When the indicator light, the output work;
5.Interface design humane, all interfaces can be directly connected through the terminal leads, very convenient;
6.Module size: 52mm * 23mm * 28mm (length * width * height)
7. There are 4 fixing bolt holes with 3.2mm holes and 48mm*19mm spacing
Product Parameters:
|
Size |
52mm*23mm*28mm |
|
Weight |
35g |
|
Thermistor |
small size 1.25mmx2.0mm glass bead |
Product Module interface :
1. J2 close to the center of the board terminal power supply 5 ~ 40V.
2. J2 close to the edge of the power supply board negative edge.
Product Output :
1. V+: Connect the positive terminal of the output power supply, and connect the load side;
2. OC: Connect the other end of the load;
3. V-: Connect the negative pole of the output power.
Pictures of Hot Bed Special MOS Tube Extension :
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.