4-20mA High Low Alarm Online pH Transmitter For Water Process Monitoring
4-20mA High Low Alarm Online pH/ORP Transmitter for Water Process Monitoring
APX1 - C1 is a measure of water pH and ORP value of real-time online monitoring controller, can access a variety of traditional pH or ORP compound sensor.
Advantages of pH/ORP Transmitter:
- pH glass electrode measurement method,applied to a variety of pH/ORP monitoring and dosing control accasions.
- The protection grade of the enclosure is IP66.
- Two settable SPST multifunctional relays.
- A high-precision 0/4-20mA current output.
- 128*64 large LCD screen, multiple languages available.
- The menu password can be set to facilitate hierarchical management.
- Shortcut button helps you perform daily essential maintenance without entering the menu.
- The meter can not only perform temperature compensation on the test sample, but also self-check the operating temperature of the instrument, compensate for the hardware temperature changes caused by temperature drift, and make the test results more accurate.
- Provide AC and DC power supply modes, both of which are wide-voltage power supply.
- The pH meter realizes miniaturization, compactness and lightweight design, which is in line with panel installation.
pH ORP Transmitter Parameters:
|
Product Name |
PH ORP controller |
| Product Model | APX1-C1 |
| PH Range |
0~14pH |
| ORP Range | ± 2000mV |
| Temperature Range |
-10～150℃ /14~302℉ |
|
Resolution |
0.01pH / 1mV/ 0.1℃ |
|
Accuracy |
PH:±0.02 pH /ORP:±2 mV |
|
Stability |
0.05% of the measurement range per 24 hours, no accumulation |
|
Temp Compensation |
Automatic or manual (NTC10K/PT1000) |
|
Sensor Diagnosis |
Screen image display |
|
Analog Current Output |
1 settable 0/4~20mA active current loop output, maximum load 1000Ω |
|
Relay Control |
2 settable SPST relays, maximum load 3A / 250VAC |
|
Screen Display |
128*64 3.2-inch large graphic dot matrix LCD |
|
Operating Environment |
0～60℃, RH＜ 95% |
|
Storage Environment |
-20～70℃, RH ＜ 55% |
| Power Supply |
AC: 100~240V 50/60Hz or DC:18~36V |
| Power Consumption | 3 W |
|
Shell Material |
Enhanced ABS |
|
Size |
100×100×120 mm(hole size 92*92mm) |
| Weight | 500g |
|
Mounting Method |
Panel installation |
PH ORP Transmitter installation
The pH/ORP Transmitter supports multiple installation modes and comes with necessary installation accessories. The pH/ORP Transmitter (APX1-C1) can be installed in a cabinet or on a wall mount. The Transmitter can be installed in the built-in support frame in two ways. In the first cabinet installation method, place a desktop in the cabinet, open the desktop, and secure it to the rear of the cabinet using support racks. The second kind of wall hanging installation, according to the gap distance of wall hanging metal bracket holes, punch two screws on the wall, put the table on the metal bracket and fixed with the support frame, the installation is complete.
pH ORP Transmitter Applications:
Water treatment monitoring: drinking water, surface water source water quality, groundwater, environmental sewage discharge monitoring, urban drainage network monitoring
Industrial process monitoring: chemical industry, petroleum, paper making, food and medicine, PCB electroplating, etc
If you are interested in more details on pH ORP Transmitter, please contact us.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.