Tilting table/Overturn table

Production data:
-shifts/day :3shifts/day(7.5hours effective per shift)
-Cakes/day :122
-Production rate (cycle time) :5.5min/cake
Theoretical capacity :350 m³/day
Basic assumptions
-working days/year :300
-rising time :2 hours
-autoclaving cycle : 12 hours (incl. loading/unloading)

plant type :tilt cake system
product range-actual
-blocks :100%(optionally profiled)
dry density range : 500 - 600 kg/m3

Mould type:
gross size :4120×1260×670
net size cake : 4000×1200×600
net cake volume :2.88 m³

Remarks:
The above mentioned theoretical capacity does not include possible production waste, broken material, reduction in net volume, etc.
This capacity is calculated on the basis that above mentioned rising and autoclaving times can be met and is considered at a 100% mould utilisation. These times are very depending on the quality of the raw materials and other conditions which are under the responsibility of the Purchaser. These times might also extend in case of increased future reinforced element production.

Packing & Shipping:

Package conforms to the requirements of customs.

After-sales service: 
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe operation.

3.Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.

4.We supplies the complete technical documents and the relative drawings of the electric components which were written in Chinese and English.

5.Service is available lifelong.