Feather Squeezer ISO9001 4m2 Feather Meal Rendering Plant

Feather Squeezer Model Is SRJS1228-1 For Drying Feather Feather Press

    The main component of the dehydration equipment is the inner tank, which is surrounded by small holes, and the clothes to be dehydrated are placed in the inner tank. The motor drives the inner tank to rotate at a high speed through the belt to generate a great centrifugal force, so the water is thrown out through the small holes on the inner tank, and is collected and discharged uniformly. Introduction Principle: The main component of the dehydration equipment is the inner tank.

    There are small holes around the inner tank, and the clothes to be dehydrated are placed in the inner tank. The motor drives the inner tank to rotate at high speed through the belt. As a result, a large centrifugal force is generated, and the water is thrown out through the small holes in the inner liner, and is collected and discharged uniformly. Dewatering equipment is generally used in the process of removing water from clothing, textiles, crops and other items.

    Structure: The dehydrator is a three-legged pendulum type, the shell and the top cover are made of steel plate, the ground material is cast iron, the outlet pipe is under the ground, and the foot base and the foot material are all cast iron. It adopts independent motor to drive through triangle belt, and is equipped with centrifugal starting flange, which can make the machine start slowly. Disadvantages: Generally speaking, for damp clothes, the drying effect achieved by the dehydration equipment for two minutes is almost the same as the effect achieved by the dryer for twenty minutes, but the dehydration equipment cannot completely dry the clothes. Therefore, a way to save time and energy is to perform a dehydration operation on wet clothes first, and then perform a drying operation after the water is removed.