Powerful Reliable 12V200AH Rechargeable Marine Battery Nano LiFePO4 Battery
This specification defines the performance of rechargeable LiFePO4 battery pack describes the type, performance, technical characteristics, warning and caution of the battery pack.
SPECIFICATION
| NO. |
Items |
Criteria |
Remarks |
| 2.1 |
Rated Capacity |
200Ah |
|
| Minimum Capacity |
190.0Ah |
|
| 2.2 |
Energy |
2.56KWh |
|
| 2.3 |
Nominal Voltage |
12.8V |
|
| 2.4 |
Outgoing Voltage |
≥12.8V |
|
| 2.5 |
Internal resistance |
≤20mΩ |
|
| 2.6 |
Limited charge voltage |
14.6±0.2V |
|
| 2.7 |
Floating charge voltage |
13.8±0.2V |
|
| 2.8 |
Standard charge current |
60A |
|
| 2.9 |
Maximum charge current |
80A |
|
| 2.10 |
Standard discharge current |
60A |
|
| 2.11 |
Maximum discharge current |
100A/ Continuous for 30min |
|
| 2.12 |
Pulse discharge current |
350A/Continuous for 3 s |
|
| 2.13 |
Discharge cut-off voltage |
8.0V |
|
|
2.14
|
Dimension |
Length: 485±3mm |
|
| Width: 170±3mm |
|
| Height: 245±3mm |
|
| 2.15 |
Weight |
Approx: 19.8±0.5Kg |
|
|
2.16
|
Operating Temperature |
Charging:0～45℃ |
| Discharging:-20～60℃ |
| Recommended operating temperature:15℃～35℃ |
| 2.17 |
Self-discharge rate |
Residual capacity:≤3%/month;≤15%/years |
| Reversible capacity:≤1.5%/month;≤8%/years |
| 2.18 |
Storage Temperature & Humidity Range |
Less than 1 month:-20℃～35℃,45%RH～75％RH |
| Less than 3 months:-10℃～35℃,45%RH～75％RH |
|
Recommended storage environment:
15℃～35℃,45%RH～75％RH
|
|
Long time storage:
If the battery need be stored for a long time, the voltage should be 13.2V(50%SOC), and stored in the condition as storage proposal. It need at least one charge & discharge cycle every six months
|
|
Customize Any of The Following Battery Packs as Required
Can be customized according to the requirements of 3.7V, 7.4V, 11.1V, 14.8V, 18.5V, 22.2V, 25.9V, 36V, 48V, 60V, 72V
Test Conditions
3.1 Standard Test Conditions
3.1.1 Unless otherwise specified, all performance tests is required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.
3.1.3 Unless otherwise specified, the tested product is required unused within two month after outgoing.
3.2 Standard Charge Mode
"Standard Charge" means at 25±2℃ charge to limit voltage with 0.33C constant current, then charge with constant voltage until current less than 0.02ItA.
3.3 Quick Charge Mode
" Quick Charge" means at 25±2℃ charge to limit voltage with 0.5 C constant current, then charge with constant voltage until current less than 0.02ItA.
3.4 Standard Discharge Mode
"Standard Discharge" means at 25±2℃ discharge to the cut-off voltage with 0.33C current.
3.5 Quick Discharge Mode
"Quick Discharge" means discharge to the cut-off voltage with 0.5C current.
Protective circuit specification
The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
| NO. |
Items |
Content |
Specification |
| 5.1 |
Over charge |
Over-charge protection for each cell |
3.80±0.03V |
| Over-charge release for each cell |
3.60±0.05V |
| Over-charge release method |
Under the release voltage |
| 5.2 |
Over discharge |
Over-discharge protection for each cell |
2.50±0.05V |
| Over-discharge release for each cell |
3.00±0.05V |
| Over-discharge release method |
Charging recovery |
| 5.3 |
Over current |
Discharge over current protection |
550±50A |
| Protection delay time |
50~150ms |
| Over current release method |
Release after cutoff the load. |
| 5.4 |
Short |
NO. |
Ban electrode short circuit |
| 5.5 |
Battery temperature |
Charge over temperature |
Protection @55±5℃ |
| Release @45±5℃ |
| Discharge over temperature |
Protection @65±5℃ |
| Release @55±5℃ |
| Charge low temperature |
Protection @0±5℃ |
| Release @10±5℃ |
| Discharge low temperature |
Protection @-20±5℃ |
| Release @-10±5℃ |
| MOSFET over temperature |
Protection @100±5℃ |
| Release @90±5℃ |
| 5.6 |
LCD Screen: |
Short press a switch, light and display screen: voltage temperature residual capacity current, light up after waiting for screen to go out, after 60 s into power saving state (buzzer open state, the buzzer alarm detection background), short press it again to light up the screen. |
| 5.7 |
Buzz: |
Buzzer open state: SOC 10% or less, buzzer alarm, long press switch 3 s, buzzer close and screen OFF buzzer hints |
| Buzzer is turned off, when the SOC 50% or less, need to manually by 3 s starting buzzer long (SOC testing and determine whether the alarm). |
|
Buzzer is turned off, charging when the battery pack is SOC > 50%, the buzzer closed automatic reset, in an open position.
|
Features:
The battery uses imported original big brand ion batteries, with a small internal resistance, big capacity, cycle times and more, no memory effect, etc; internal circuit for multiple protection design, can prevent over charge, over discharge, over current; production process quality inspection and monitoring the use of computers to ensure superior battery performance.
Applications:
Golf trolly of 12v 1200w motor , Wireless camera, surveillance cameras, wireless infrared detector, car LCD TV, portable DVD, personal treatment system, PDA personal data assistant, personal communications systems, walkie-talkies, digital cameras, camcorders, video cameras, Bluetooth devices, CD players, MD players, MP3 players, smart cards, aviation model LED lights and other fields can be used in 12V power.
![]()
How to choose a suitable battery pack?
- battery voltage is the same with the original.
- battery size same with the original. Or similar/smaller.
- battery plugs same with the original (check the plug diagram)
Match the above three conditions, in general, this battery can be used.
The larger of MAH, the longer use time. Different voltage, battery size, shape, can be same voltage, because the battery combination of different ways, the shape is not the same. You can leave a message about your old battery, please pay attention!!!
![LiFePO4 12V Rechargeable Battery Pack 100Ah Solar Marine 1KW Power Energy Storage 0]()
Product advantage
long life & deep cycle( over 2000cycles @ 100%DOD)
· with built-in PCM/BMS protection
· super quick charge/discharge performance
· safe pressure valve design ( no explosion, no fire)
· high energy density
· low self-discharge( <3% per month,<15% per year)
· high consistency
· easily replace lead acid battery
Quality Control
Capacity test, High current discharge test,Low temperature test, Short circuit test, Over charging test,
Over discharging test, Cycle performance test, Crush test, Impact test, Vibration test, High temperature test
Warranty
• We offer 3 years warranty for battery packs in low discharge rate (below 1C) applications,
• We offer 2 years warranty for battery packs in high discharge rate (1~3C) applications.
• For charger / BMS, here are one year warranty.
Store
The battery need to be charged every 6 months if out of use; No fall down, no pile up over 6 layers, and keep face up.
Battery Pack Delivery
• By Air Door to Door Service
• By Sea Door to Door Service
• By Express: EMS, TNT, UPS, FedEx
![]()
FAQ
1. Can you accept OEM and ODM services?
Yes, just tell me your requirements and we will provide you with the best solution.
2. What are your payment channels?
TT, L/C, West Union etc.
3. What service do you provide?
All our batteries have passed the safe test and performance test before shipment.
Support printing your logo on the battery.
Small order is acceptable.
4. How you shipping the goods and how long it will take?
Normally FEDEX, DHL,UPS etc, around 4-7 days.
5. Can I just try samples for the first order?
Yes, 1 pcs sample and small trial order are acceptable.
24 hours customer service, waiting for your inquiry!
![]()
