Plastic Primer

Features: No need to dilute, can be used directly.

Used for: PA, UP, PVC, PET, PP and other plastic substrates, except of PP, PE.

Spraying and Drying: spray two coats, after 10-15 minutes can spray the top coat directly.

Shelf life; At 20 ℃ with original sealed, can store more than 2 years.

Package: 1L*15

-

Note: If it is not the above mentioned substrate, please do the experiment first or consult our company’s Technician Department.

SURFACE PREPARATION:

1. Surface Should Be Clean And Free Of Dust, Grease And Oil.

2. Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.

Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats

Apply Using a Spray

Gun Nozzle:

1.2-1.4mm (Gravity Spray Gun)

1.3-1.5mm (Suction Spray Gun)

-Spraying Pressure: 3-4 Bar.

-Spraying Viscosity: 13~18s(Ford Cup #4 At 20℃)

-Number Of Coats: 3 Coats Maximum.