Features: high solid content, evry good adhesion, high coverage power, high gloss, easy sanding.

Usage: Suitable for fast partial repair, and also be used to whole car spraying.

Suitable for: Putty surface, the old paint surface which has been sanded.

Can not apply to: bare iron surface. 

Mixing Ratio:

Spraying: Spray 2 to 3 layers, the flash-off time is 5 to 10 minutes.

Drying: At 20 ℃, 10 minutes for surface dry, 30 minutes thorough dry and can be sanded.

Shelf life: At 20 ℃ with original sealed, can store at least 3 years.

Package: 4L*4, 1L*12

SURFACE PREPARATION:

1. Surface Should Be Clean And Free Of Dust, Grease And Oil.

2. Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat. 

Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats

Apply Using a Spray

Gun Nozzle:

1.2-1.4mm (Gravity Spray Gun)

1.3-1.5mm (Suction Spray Gun)

- Spraying Pressure: 3-4 Bar.

- Spraying Viscosity: 13~18s(Ford Cup #4 At 20℃)

- Number Of Coats: 3 Coats Maximum.

1. OEM service provided.We can design and make for the customers for their own brands.

2. Fast Delivery. We can finish the production and deliver/ship the goods within 7 to 10 days after the order confirmed.

3. We will produce the products according to the customers' request, the quality and special requirement.

4. We provide the promotional gifts to the customers. If the customers have their own brand, the promotional gifts will be with their own brand name and design.

5. We will give fully support to the customers.