30L Ethanol Extraction Centrifuge Centrifugal Hydro Extractor 1800rpm Anti Corrosion

PSB320P Series Flat Plate Low Temperature Anti-corrosion Explosion-proof Centrifugal Hydro Extractor

Main Features

• Soaking temperature designed to be -40°C, customizable as needed by customers.
• Optional basket volumes, large in filtering area and good in soaking & separation effect.
• Configured with a quick-opening connector for easier pipe connection.
• Variable control and energy consumption braking adopted to realize stepless speed regulation and bidirectional (forward and reverse) revolving.
• Solid particles less prone to breakage, easier in replacement of filter bag.
• In compliance with the GMP standards, enclosed structure and zero sanitary dead angle designed to effectively avoid contamination of materials.
• Multiple safety protections: pressure detection, overvibration protection, cover opening protection, electromagnetic interlocking, etc.
• Small floor covering area, easy maintenance, low failure rate and long service life.
• Explosion-proof design, meeting the requirements for certification of explosion protection, etc.

Technical Parameters

Anti-corrosion

The materials to be separated are normally corrosive. So for safety, the parts in contact with these corrosive materials must be anti-corrosive.

Material of constructions: 304, 321, 316L, 904L, TA, 2205, 2507etc.

When there is determined application experience or corrosion data, carry out coupon test and laboratory verification to ensure selected material meet anti-corrosion requirements.

Surface anti-corrosion treatment: PE lined, rubber lined and halar lined and F40, F46, PFA etc.

Anti-corrosion requirements of sealing elements can not be neglected; material of sealing elements shall ensure prevention against corrosion from acids, alkali and solvents.

The customer shall forward the physical and chemical properties of the material and washing liquid (chemical properties and separation temperature etc.) to the manufacturer so that it can make recommendations for centrifuge materials based on characteristics of the separation medium, and that the suitable seal ring, seal washer and filter cloth can be provided, thus ensuring anti-corrosion requirements on the centrifuge.

Explosion-proof

If the centrifuge works in the environment, where there are some explosive substances, the centrifuge should be explosion-proof. If the centrifuge becomes really explosion-proof, it should take a variety of measures in mechanical, electrical control and the accessories selection.

Electric control: explosion-proof isolator, non-touch dynamic braking system, static grounding and explosion-proof automatic control.

Mechanical system: explosion-proof motor, explosion-proof light, anti-collision and anti-static driving belt.

Explosion-proof accessories: nitrogen protection system, on-site explosion-proof control button.

Therefore, for those environments required explosion-proof, users can specify the filtration medium, requirement and degree of explosion-proof when they take orders, in order to buy the right equipment to meet the requirements of explosion-proof.

Refer to Application Technology of Centrifuge in Explosion Proof Site P103.