PP Silicone Coated Release Liner For Waterproof Membrane
PP Silicone Coated Release Liner For Waterproof Membrane
Description:
|
PP Silicone Coated Release Liner For Waterproof Membrane Silicon type: Solvent Silicon
PP release liner is a pleastic release film which made of Polypropylene film(Also called PP) as carrier, silicon coated on either one or two-sided releases options.
|
Parameter:
| Products Name | PP Silicone Coated Release Liner For Waterproof Membrane | Spec. | 0.05mm*1040 | ||
| Detection Methed | Q/TPXP 1-2013 | Date | 2021.3.3 | ||
| NO. | Item | Factory Requirement | Detection Value | Individual Determination | |
| 1 | Appearance | No bubbles, no stains, no damage, no impurities | Qualified | Qualified | |
| 2 | Spec. | Width | 1040±10mm | 1041 | Qualified |
| Thickness | 0.05±0.005mm | 0.051 | Qualified | ||
| 3 |
Max.F (N/50mm) |
TD (CD) |
≥30 | 58 | Qualified |
| MD | ≥30 | 92 | Qualified | ||
| 4 |
Elongation (%) |
TD (CD) |
≥150 | 764 | Qualified |
| MD | ≥200 | 528 | Qualified | ||
| 5 | Tensile Strength |
TD (CD) |
≥16 | 23 | Qualified |
| MD | ≥18 | 36 | Qualified | ||
| 6 |
Release Force (N/25mm) |
10-20g | 0.134 | Qualified | |
| 7 | Subsequent Adhesion (%) |
Grey side≥80 | 82 | Qualified | |
Advantages:
| 1. Easy to construction |
| 2. Low release force, easy peel off when remove the release film |
| 3. High residual adhesiveness rate(≥80%) to prevent the influence of silicon transfer on products(We also can do UV curing type, adhesiveness rate can be done more than 90%) |
| 4. Environmental Production technology of solvent and solvent-free products |
| 5. Environmentally Friendly. Can be recycling |
| 6. High temperature resistance than PE, can resistance 130-160 degrees |
Application:
Release Film for Butyl Tapes
Release Film For Self-adhesive Waterproof Membranes:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.