EVE LF280K 280Ah Lifepo4 Battery with 6000 Cycles EU Stock Romania Grade A Solar Cell VAT Free
EVE LF280K Grade A 280Ah LiFePO4 solar cell with stud terminals, includes free busbars and M6 nuts. Available from Poland stock with free shipping to EU countries, VAT and tax free.
- Stud type terminals with free busbars (1 cell with 1 busbar)
- Poland stock with free shipping to EU countries
- VAT and tax free
- Max pulse discharge current: 2C for 30 seconds
- 7 days delivery to Romania
- Free shipping to Germany, Austria, Italy, France, Spain, etc.
- 5-7 days delivery time
| Specification | Value |
|---|---|
| Nominal Capacity | 280.0 Ah @ 0.5C discharge |
| Nominal Voltage | 3.2V |
| Cycle Life | ≥6000 cycles |
| Max Charge Current | 1C (280 Amper) |
| Charging Temperature | 0℃~55℃ |
| Storage Humidity | ＜70% |
| Dimension | 174×72×205mm |
| Weight | 5.25kg |
Ideal for solar energy storage, off-grid backup, caravan, camp caravan, golf cart, forklift, electrical bike, motorbike, RV, solar storage system, E-motorcycle, home energy storage system, powerwall, and more.
- Each cell tested before shipping
- 280Ah sufficient capacity verified
- 3.2V voltage confirmed
- Low internal resistance
- Intact QR code
- Safest Lithium battery with built-in PCM/PCB
- Non-flammable and non-explosive
- Clean and green energy, no toxic materials
- Long life cycle: 80% capacity remain after 500 deep cycles
- No memory effect, highly efficient charging
- Operation temperature: -20~55°C
- Good performance at high temperature
- Low self-discharge rate: < 3% monthly
- Deep cycle capability: more than 2000 cycles lifespan
3 Years Warranty
Compensation, refund, replacement at free of charge. Response within 12 hours for warranty claims.
- Exercise caution when working with electrical equipment
- Wear safety glasses and gloves when appropriate
- Ensure cells are within operating temperature range prior to use
- Do not use if cells are punctured, damaged or leaking
- Provide adequate protection to cells during assembly
- Dispose of properly at recycling facility
- Do not submerge in water
- Do not expose to direct heat, extreme temperatures or fire
- Prevent harsh impacts or extreme vibrations
- Do not submerge the battery in water
- Do not insert batteries with (+) and (-) reversed
- Do not disassemble, dispose in fire, heat or short circuit
- Do not expose batteries to sunlight for long time
- Do not keep batteries close to children
- Do not short circuit the battery in any situation
- Do not discharge new batteries - fully charge them first
- Do not open the battery safety valve
- Do not violently wrest the screw on the terminal
- Do not mix different brands of battery in one pack
- Do not mix different capacity or condition batteries together
Please check all batteries voltage and internal resistance and ensure they are balanced before DIY assembly. All batteries are tested before shipment, but you should verify them as well. You must have basic knowledge of electronics and battery assembly. No refund or warranty for unprofessional operation. Some cells may have small scratches due to transportation, but this does not affect usage.
| Area | Shipping Method | Shipping Time | VAT |
|---|---|---|---|
| EU | By train + delivery to door | 30-45 business days | No VAT |
| EU | By truck + delivery to door | 20-30 business days | No VAT |
| US | By ocean + delivery to door | 50-60 business days | No VAT |
| Australia | By ocean + delivery to door | 20-30 business days | No VAT |
| Thailand | By ocean + delivery to door | 15-20 business days | No VAT |
| ALL | UPS | 5-8 business days | With VAT |
| ALL | By air | 7-12 business days | Depends |
Note: Please choose your preferred shipping method. We can ship to other countries - contact us for details. We provide honest shipping estimates and advise against unreliable cheap but fast alternatives.
Why you need to top balance LiFePO4 cells before building a battery pack:
Regardless of cell grade (A, B, C) or whether they are new or used, initial balancing is essential to bring all cells to the same state of charge. Voltage alone is unreliable for determining state of charge in LiFePO4 chemistry due to the flat charge/discharge curve.
- Accurate capacity test results during first use
- Prevents premature BMS triggering due to cell voltage differences
- Identifies problematic cells before final assembly
- Ensures optimal pack performance and longevity
While parallel connection allows natural balancing over weeks or months, manual top balancing is recommended for large battery banks, cells with varying internal resistance, or when precise capacity matching is required.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.