Professional hydraulic press with 30-ton rated capacity, ±2% pressure control accuracy, and 750mm wide stable body. Ideal for heavy-part press-fitting, waste compression, and various industrial processing applications.

The 30-Ton Hydraulic Shop Press is a professional hydraulic device designed for medium and heavy workpieces. Key features include:

• High-strength alloy steel construction for durability and deformation prevention under 30-ton capacity
• 505mm inside width between guide rails compatible with most small/medium workpieces
• 750mm overall width provides stable support for machine body
• Adjustable platform height (267mm-990mm) for various workpiece thicknesses
• 152mm cylinder stroke for sufficient vertical movement space
• ±2% pressure control accuracy reduces workpiece processing defects
• 125 Kgs shipping weight allows transfer with conventional forklift or hydraulic truck

Ideal for press-fitting heavy parts in construction and mining machinery, including large bearings and bushings. Prevents component cracking or misalignment from manual knocking.

Capable of bending, flanging, and straightening steel/iron plates (8-20mm thickness). Used in steel structure plants for creating brackets and repairing deformed parts.

Facilitates disassembly/assembly of medium-sized molds (automotive panels, large plastic molds) and tooling fixture debugging. Applies uniform pressure for mold separation or component press-fitting.

Compresses thick metal scraps (steel pipes, iron plates, mechanical parts) into high-density blocks, reducing volume by over 60% for easier storage and transportation.

1. Check hydraulic oil level (minimum 1/3 of tank scale line)
2. Inspect oil inlet filter for clogs (clean with diesel if needed)
3. Contact professionals if hydraulic pump or solenoid valve issues are suspected

1. Clean guide rails and lead screws of debris
2. Apply lithium-based grease (Model 2#) to dry lead screws
3. Check motor wiring and carbon brushes if jamming persists

1. Check for oil return pipeline clogs
2. Verify hydraulic oil viscosity (use 32# oil in low temperatures)
3. Replace aged cylinder seals if needed

• Use ≥200 Kgs capacity forklift/crane with proper tilt control (≤10°)
• Install on hardened ground (≥500 Kg/㎡ capacity, ±3mm flatness)
• Verify 380V three-phase AC power supply with proper grounding (≤4Ω resistance)
• Conduct no-load test before gradual load testing (start at 50% capacity)