50 TONHYDRAULIC &AIR SHOP PRESS WTH GAUGE, 200mm Stroke + 690mm Bed

The YD06-017 50 Ton Hydraulic & Air Shop Press with Gauge is an industrial-grade equipment designed for heavy machinery processing and large-component maintenance. It combines fast pneumatic drive with stable hydraulic pressure boosting, featuring a 50-ton rated capacity and extra-wide worktable for operations like heavy bearing press-fitting, thick steel plate shaping, and straightening of large mechanical components.

• Heavy-Duty Performance: 50-ton capacity with 200mm cylinder stroke handles bending of 50-80mm thick steel plates
• Dual-Drive Efficiency: Pneumatic system for fast positioning (+50% efficiency) and hydraulic system for stable pressure (±2% accuracy)
• Structural Stability: Welded thick steel frame with 690mm-wide worktable (800kg capacity) prevents workpiece displacement
• Safety Compliance: CE-certified with emergency stop button, overload protection valve, and protective fencing

• Heavy Construction Machinery: Straightening deformed frames and large connecting rods (35-45 tons recommended pressure)
• Thick Steel Plate Shaping: Bending 50-80mm steel plates into structural parts with precise angle control
• Heavy-Duty Auto Repair: Press-fitting large wheel hub bearings (200mm+ diameter) with 30-40 tons pressure
• Agricultural Machinery: Disassembling heavy components like gearboxes and engine blocks

1. Check air compressor pressure (0.6-0.8MPa required)
2. Inspect pneumatic pipeline for blockages/leaks
3. Test solenoid valve function and replace if faulty

1. Verify worktable levelness (≤0.2mm error)
2. Ensure steel plate is firmly fixed with proper fixtures
3. Check hydraulic system pressure stability

1. Confirm workpiece doesn't exceed 50-ton capacity
2. Recalibrate overload protection valve to 55 tons
3. Replace hydraulic oil if viscosity is high